SMC Discussion Areas

Hi guys, I just picked up a Coke Thermometer, any advise on how to clean the plastic cover on the piece?  Its bad with water marks and what looks like dust but Ive cleaned it numerous times with water and windex, any help on this one please?

Try Novus Polish , and a very soft towel.

http://www.novuspolish.com/

you can find it online, the big box stores,  hardware sotres, etc

Yep I agree, Novus Deep scratch cleaner followed by the Fine scratch remover/polish & a couple of microfiber cloths for each stage of the cleaning. good stuff! works well on plastic lightup signs on Coke machines too.

or if you are in a hurry, many people have had success with automotive headlight cover scratch removers.

Maybe replace it with a new glass cover?

I've used the headlight scratch remover, it works pretty good. with they kit, you are basically wet sanding the film off and scratches out then polishing it to a nice clean surface. It was pretty bad and came out pretty clear. if you are starting with pretty good, I think it may work very well.

I went to the "Do It Center" they did not have it the Novus, so I went to "Auto Zone" and bought one of the those headlight kits and it worked perfect. 

Thanks for the tips and HAPPY 4TH

Yes I always have better luck with head light cleaner kit