SMC Discussion Areas

But it is Coca Cola red and white!  :happydrinkers: You may have noticed in my signature that my son and I will be riding in a 100 Mile Komen Ride for the Cure in early August.  We did the 60 mile ride last year and I rode a 1975 Raleigh Grand Prix (one that was actually made in Nottingham, UK--GP and Dave!) 10 speed.  It was a great bike in its day but not exactly current technology.  Today, I picked up a nice used 2009 Cervelo S1 Road Bike.  This same model was actually ridden in many of the big races by the pros including the Tour de France.  With the more modern gearing, the lightweight aluminum frame and carbon fiber fork and seat stay, I should be able to get down the road a bit quicker and without as much effort!  Pretty amazing how much road bikes have changed in 34 years!  Half the weight and twice the gears (20 speed)!  I will never sell my Raleigh but it will get retired to shorter recreational rides.

The 100 mile ride will actually be a tune up ride for a 4-day 400 mile ride at the end of August so I figured I should upgrade my equipment.  That ride will start in Lansing, MI and wind its way through western Michigan finishing 4 days later with a ride across the Mackinac Bridge!

Looking forward to some serious training this summer!

 :drinking: Tim :drinking:

Not a bad ride Tim!  I have a 2008 Trek 5200 Carbon Fiber.  I have a friend / now much of acquaintance that rides for Garmin / Slipstream. He took 1st in Stage 3 in Tour De France 2010.  ( Tyler Farrar )  We went to same high school and rode, or should I say I tried to chased after him!!!  He was damn good than and that was 12 years ago!

Sounds like a fun ride...

Jared

Very nice  Cervello TIm!

I also remember the Grand Prix,  a couple kids in the neighborhood had those, they were neat, high end for that time.  I remember the seat was very different, sort of contoured, not like the standard seats back then.  I think they were pricey. 

100 miles on that seat? ouch...
I went 1.5 miles with my boys last night..and that was tough...whats the trick?

Padded shorts...and a whole lot of practice.   :laugh:

Seriously - a decent set of bike shorts, AND a well-fitted bike make all the difference.  Find a local bike shop, not a big-box chain place.  You'd be surprised how competitive their pricing is and you get real service from real riders.  The shop where I get my gear has different rides 3-4 nights per week for anyone interested.  Beginners, Ladies, Advanced, etc. 

Being a bit more modest in my 40's than I was in my teens, I have padded compression shorts that snap into a pair of cargo-style shorts like a liner in a bathing suit.  To the casual observer they look just like regular shorts - but my backside knows the difference!

My wife and I are just getting back into riding as well.  We do a lot of "Rail Trail" rides - 8-10 miles, and we are headed for our first 20 miler in a couple of weeks, followed by a 35 mile jaunt in June.

I have a Specialized Sirrus road bike that is a nice entry-level multipurpose bike.  Nothing quite as nice as Tim's bike (mmmmmm...Carbon Fiber!)- but I am not aiming for any Century rides anytime soon.

Nice Bike Tim ,Just wondering where it going in that garage  :biggrin: I don't remember a whole lot of room in there .

all i can say is i will stick to my Schwinn wit its bananna seat and butterfly  handlebars


http://content.usatoday.com/communities/driveon/post/2012/04/man-sues-bmw-for-persistent-erection-after-bike-ride/1#.T6LXjVLy3Z4


I see a resemblence in seats....be careful!!!!!

The Cervelo S1 is actually an aluminum frame with carbon fork and seat stay.  The first time I looked at it I would have sworn it was all carbon based on the geometry.  Still ridiculously light and from the reviews performs as good or better than the entry level full carbon frames that cost more.

The padded shorts and the new seats with the depression down the center make a big difference.  :biggrin:  Last year, I was attempting to ride my old Raleigh with the original seat and I was quite numb after just a short 15 or 20 mile ride.  I switched out to a new seat, nothing high end but a modern design and it made all of the difference in the world.  I will have to put a few miles on that seat to see if I like it but I may end up switching it out.  Need to make a few adjustments to get the bike to a better fit for me.  It came off of a high end Felt Road bike that the guy bought to replace the Cervelo so it is a good seat.  Also need to decide on shoes and clip in pedals.

And Pat, this baby is going down the basement!  don't need it to disappear on a night when my boys forget to close the garage door!

 :drinking: Tim :drinking:

At least if that happened to me, I would stop rolling out of bed in the middle of the night! :laugh: 8) :biggrin:

 :drinking: Tim :drinking:

I like the Northwave Shoes. They are made in Italy.  I have had the same pair since 1998.  Pedals; the Look Pedals arent bad there are several different models.  I have had 3 or 4 different sets and could never tell the difference.

I will check those out.  I have been lloking for brands with wider widths?  I wear a 12EE and so far what I have tried on have been a little tight in the toe box.

 :drinking: Tim :drinking: