|
Title: Have a Coke sign on the side of the early Vendo 63 Post by: sodaman on April 16, 2012, 02:36:06 pm Does anyone make the sign for the side of the early Vendo 63 ss, I think Fun-tronics used to have some long ago but I couldn't find anyone that sells it now. IF not, I need the measurement of the sign and the placement measurements on the side of the machine. The machine is all red except for the sign, right? I would appreciate the help. Thanks.
Title: Re: Have a Coke sign on the side of the early Vendo 63 Post by: Fire708 on April 18, 2012, 12:09:03 pm Funtronics has the lettering.
http://www.fun-tronicsllc.com/index.php?crn=315&rn=1198&action=show_detail I have a '64. The top of the machine is red. I have seen them with the white going across the top and some where the angle part of the white is near the front not the back. Ive also seen them with the "Have a coke" slogan AND the woodgrain front, dont know if this was from the factory or a repaint but I was under the impression that the woodgrain is post '64. The white backgound on my V63 is: 3/16" from top. 1/16" from front cabnet edge (not the door) 16 1/8" tall Top back corner of white is 1 11/16" from back edge Bottom back corner is 3 1/16" from back edge. I/ve attached a crude drawing, hope it helps. Title: Re: Have a Coke sign on the side of the early Vendo 63 Post by: sodaman on April 19, 2012, 08:43:16 am Thank you so much for the reply, this is a great help. H.
|