|
Title: Vendo 56 parts needed Post by: Jimbo on April 09, 2012, 11:50:07 am The original owner turned this into a refrigerator. I need 5 shelf brackets, 5 shelves, and a decent original coin door (I want to keep the original paint on it)
Thank you Title: Re: Vendo 56 parts needed Post by: BONOVOX on April 09, 2012, 02:54:00 pm Hey Jimbo
Welcome to the 56 club :happydrinkers: Although nothing is impossible, it might be a while before the 56 shelves spring up, let alone a door. Things do come up from time to time, but the 56 is a bit of a harder machine to come by, and its just the luck of the day as to what pops up here or Ebay etc.... BUT good luck, and it would be nice to bring that machine back to its glory!! :happydrinkers: Title: Re: Vendo 56 parts needed Post by: cokecolaman on April 09, 2012, 03:28:54 pm I have a line on a parts machine...I will know more in a few days.
Title: Re: Vendo 56 parts needed Post by: SIGNGUY on April 09, 2012, 03:52:10 pm it's going to be tough to find a coin door that will look correct , if your looking to keep the paint original... everything fades, and ages differently so will be hard to match..
Title: Re: Vendo 56 parts needed Post by: Creighton on April 09, 2012, 09:54:31 pm A second welcome to the 56 club!! I was writing you a reply that just disappeared when it went to a second page. Sorry not going to retype but the crux was maybe a stack out of a square top would work till you can find the real deal.
Hope the parts machine works out and keep us posted of progress. Thanks! Creighton Title: Re: Vendo 56 parts needed Post by: BrianS on April 09, 2012, 10:20:10 pm The 56 is a great machine. Stick with the parts hunt and you will be thrilled with the final result. Good Luck!!
Title: Re: Vendo 56 parts needed Post by: Jimbo on April 11, 2012, 01:25:48 am Found the shelf brackets (thanks to Bireleys1). Thanks for the welcome into the 56 club. Do I have to pay membership dues?
Title: Re: Vendo 56 parts needed Post by: BONOVOX on April 11, 2012, 03:57:12 pm Yes, membership dues are encouraged :tounge: but not required lol
I take Amex, and CASH.... sorry, I don't take square tops Again, nice score, and glad to hear ya already got some missing parts!!! :happydrinkers: Title: Re: Vendo 56 parts needed Post by: flippa on April 17, 2012, 09:26:08 am I had a question regarding these 56s. Will the parts from a flat top 56 (or 63) fit these cabinets? I know there would need to be some modificantions, but could they be made to work?
I had a chance to grab a gutted cabinet a few years ago & passed because of all the missing parts & pieces. Title: Re: Vendo 56 parts needed Post by: flippa on April 17, 2012, 09:36:35 am Obviously this would become an electric vending machine :upside:.
Title: Re: Vendo 56 parts needed Post by: zadd on April 25, 2012, 07:21:19 pm I have a 56 bottle stack for a manual crank . Let me know and I will get you some photos . It came out of a Pepsi transitional machine . Thanks
|