|
Title: ideal coin mech Post by: cohammer on February 11, 2012, 11:43:46 pm On my ideal 35 the coin mech looks to be complete but when I drop in a nickle it hits the coin return and goes straight thru. It does only have one slot on the front and it says 5cents could this be a simple fix? Is there any way too tell the date on the mech ? It also says 5 cents on the inside stamping of the mech.
Title: Re: ideal coin mech Post by: collecture on February 11, 2012, 11:49:06 pm Can you post a picture of it?
Title: Re: ideal coin mech Post by: cohammer on February 12, 2012, 12:16:56 am here are some pictures
Title: Re: ideal coin mech Post by: collecture on February 12, 2012, 12:41:17 am Looks complete and probably just needs a good cleaning
That style mech is not "correct" for the Ideal 35 though. Title: Re: ideal coin mech Post by: cohammer on February 12, 2012, 08:46:03 am That is what I was wondering because the instructions under the lid show a mech with the coin return out the front.
Title: Re: ideal coin mech Post by: MoonDawg on February 12, 2012, 08:51:35 am Are you sure there isn't another slot under that plate? I'm looking at one I have and the dime slot is on the right and nickel slot is on the left. You may have a 10 cent mech. with a 5 cent rejector.
Title: Re: ideal coin mech Post by: cohammer on February 12, 2012, 09:12:15 am Yes it does have two slots under the tag and I was just looking too see if i should order the coin plate that has slot for dime and nickel
Title: Re: ideal coin mech Post by: collecture on February 12, 2012, 09:50:38 am You would need to have a dime cam and a nickel cam on the shaft to accept both denominations. Right now you only have a single cam. I have dime rejectors and will even trade you if you want - you just pay shipping.
Title: Re: ideal coin mech Post by: MoonDawg on February 12, 2012, 10:32:07 am Tom, PM sent.
|