Title: Identifing vending models
Post by: t-man on June 25, 2004, 09:05:38 pm
I own two soda vending machines. Where should I look to find the model numbers on these machines ? Both machines appear to be late 70's or early 80's models. One is a Pepsi machine and the other a Coke machine.
Any help would be appreciated.
Any help would be appreciated.
Title: Identifing vending models
Post by: t-man on June 28, 2004, 09:53:03 pm
Have included photos this time. Would appreciate any help on where to find model number identifications.
Title: Identifing vending models
Post by: t-man on June 28, 2004, 09:54:49 pm
Here is photo of second machine, both machines in good working order.
Title: Identifing vending models
Post by: johnieG on June 29, 2004, 06:12:00 am
There should be a manufactures tag somewere on the outside of either machines chassis, ( some times these "disappear" when machines are "retired" from a bottlers route, ie: no serial no.'s hint-hint 
) then when you buy them on Greed-bay or where-ever, you are stuck trying to figure out what model you have, (case in point) look around on the inside for the wiring diagrams and/or the loading instructions there may be a copyright notice that I.D.'s the maker,
The flat-front Pepsi looks like an Vendo to me , & the other one looks like a Dixie narco, but it's just a guess.
) then when you buy them on Greed-bay or where-ever, you are stuck trying to figure out what model you have, (case in point) look around on the inside for the wiring diagrams and/or the loading instructions there may be a copyright notice that I.D.'s the maker, The flat-front Pepsi looks like an Vendo to me , & the other one looks like a Dixie narco, but it's just a guess.
Title: Identifing vending models
Post by: on August 15, 2004, 02:25:35 pm
I have a Pepsi machine that looks alot like yours. Mine is a Dixie-Narco model DNCB 240/138-6. Mine has an I.D. plate on the left side of the door if your facing it. I've been trying to find a manual for it on-line. I'm not having much luck though. If yours is the same and you come across a manual, could you let me know?
Thanks,
Dan
Thanks,
Dan
Title: Identifing vending models
Post by: t-man on August 24, 2004, 08:04:19 pm
| Quote (danl44 @ Aug. 15 2004,3:25) |
| I have a Pepsi machine that looks alot like yours. Mine is a Dixie-Narco model DNCB 240/138-6. Mine has an I.D. plate on the left side of the door if your facing it. I've been trying to find a manual for it on-line. I'm not having much luck though. If yours is the same and you come across a manual, could you let me know? Thanks, Dan |
Dan,
My Pepsi machine is a DNCB/240. If I find a manual for it I will contact you. Thanks to all for the help.
t-man