|
Title: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Tomygunz7 on November 30, 2011, 05:32:39 pm Need to know the length I'm thinking about and ace lock 5/8 but not sure? Thanks!
Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: mznb1u on November 30, 2011, 08:13:23 pm Check with Curtis at Memory Lane or Rod at Fun-tronics.
:drinking: Tim :drinking: Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Tomygunz7 on November 30, 2011, 10:45:11 pm A detailed pic of the lock mechanism would help if anyone has one. Maybe one showing it lifting the lock mechanism. Just trying to figure out how this lock will retrofit then I can share.
Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: memorylane on December 04, 2011, 10:15:04 am STONER CANDY MACHINE CORRECT LOCK & CAM: This is what you need for the side mount locking system on a Stoner Candy Machine. You will need to go to your local lock shop to get this one. You will not find it at your local chain store. As of now, I think I'm the only one making the cams. But you can Google the lock in the picture to find it online. It should run you around $15.00 + shipping. A standard lock from Lowes will work fine for the bottom cabnet door.
Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: memorylane on December 04, 2011, 10:21:03 am Here is a link for the lock with a great picture and size
http://jmlock.com/fortlock-5-8ths-inch-multifunction-tubular-cam-lock.aspx Hope this helps everyone, Thanks Curtis Kauffman: Memory Lane Restorations / www.retrovending.com Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Pat Pixley on December 04, 2011, 10:21:42 am Hey Curtis Just going to give you a heads up going to call you later on today want to run something by you
on my stoner :smile: Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: memorylane on December 04, 2011, 10:37:38 am In the shop all day, customers coming at 2pm and whenever the others show up. but call anytime.
Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Tomygunz7 on December 04, 2011, 10:17:54 pm Thanks guys!
Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Slapshot42 on January 14, 2012, 10:00:17 pm Here is a link for the lock with a great picture and size http://jmlock.com/fortlock-5-8ths-inch-multifunction-tubular-cam-lock.aspx Hope this helps everyone, Thanks Curtis Kauffman: Memory Lane Restorations / www.retrovending.com Is it common for these to have both tublular type locks? Or is the side tubular lock only on the side to have a tubular style lock As for the front is a coventional type of lock with a modern type looking key? Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Jim on January 15, 2012, 09:15:27 pm Is it common for these to have both tublular type locks? Or is the side tubular lock only on the side to have a tubular style lock As for the front is a coventional type of lock with a modern type looking key? I actually like the regular keyed cam locks, not the "Ace" Style, tubular, locks as these tend to represent a "newer" style lock for a machine from the 40's - 50's...Just my opinion and preference... Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Slapshot42 on January 15, 2012, 10:33:07 pm I used a 7/16 lock cam for lower storage cabinet, worked great. I need to pick up a 5/8 lock cam for the main door. I tried intially using a 5/8 down below and the threads were not long enough.
I assumed both would be 7/ 16. I looked at the lock core link Curtis referenced at noticed the lock was 5/8. Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Jim on January 16, 2012, 05:33:57 am I used 5/8" and 7/8"
Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Slapshot42 on January 16, 2012, 09:26:34 am I used 5/8" and 7/8" Oops; correction I used 7/8. We use an open end 7/16 wrench at work all the time... at least I had the 7 right.... :laugh: Which closing bracket did you equip it with? I was trying to figure out what it catches on to close...? Title: Re: anyone know the length needed for the tumblar cam lock on stoner junior? Post by: Slapshot42 on January 16, 2012, 11:36:42 pm Jim,
Could you snap a photo of the inside locking bar? I installed the 5/8 for the main door. I can move the locking bar up and down but I cant get it to lock. Does the tumbler need to be positioned a certian way? The lock comes with 3 locking bars which are interchangable. 1 1/8 inches, 1 1/4, and 5/8. I have the 5/8 bar installed. Pictures to follow.. Thanks... |