|
Title: Westinghouse selectomatic Post by: loman4ec on June 18, 2004, 08:18:46 am I am looking to buy a Westinghouse selectomatic machine. I have owned slant shelf machines in the past but I really like the Westinghouse Machines. Can anyont tell me an average of what these machines are worth restored? I know that they are only worth what someone wants to pay, But I haven't paid much attention to these machines in the past, so I havent seen what they are going for. I am looking for either a WC-60-MD or WD-78-MD. Are there any difference in value in these two machines? I have also heard that they can be made to vend cans. Is this true? And how much does the conversion cost? Thanks for all of your help. Josh
Title: Westinghouse selectomatic Post by: Bob K on June 19, 2004, 01:36:07 pm loman4ec, there's a 78 on ebay at the moment. Pictures aren't the greatest but worth a check.
Wouldn't you rather have an original than a restored version? Anyway, this is the one on ebay: http://cgi.ebay.com/ws....WA%3AIT Bob Title: Westinghouse selectomatic Post by: loman4ec on June 19, 2004, 04:49:12 pm Thats the one that I am looking at. This isn't your machine is it?
Title: Westinghouse selectomatic Post by: Bob K on June 21, 2004, 09:03:00 pm No, it's not mine. I did just buy one, though.
Bob Title: Westinghouse selectomatic Post by: johnieG on June 21, 2004, 09:52:18 pm I've posted some info on the Select-a-matic 12oz. can adapters in the post 60's section, slide over and have a look-see. as well, they are spacers that insert into the stock OEM rack depth adjusters, ( that adjust the vending stack/column depth for 8-12oz. glass bottles normally) to accept 12oz. cans.
they are basically 1/2" wide & 3" deep, that attach into the crown guide channel of the spacers, & extend a little past the bottom of the spacers to space the 12oz. cans forward in the stack/column Title: Westinghouse selectomatic Post by: johnieG on June 21, 2004, 09:54:24 pm and the veiw at the bottom, as well.
|