|
Title: Large Door 110 Parting Out Post by: coke_and_stuff on November 13, 2011, 12:44:17 am I just picked up a Large Door 110 parts machine
I have the following Change Giver coin mech Sold Out Flag Lockbar and latches coin chute cap catcher Coin Door Main door latch Front main door as with lower "Coca Cola" Main door liner I also have the following but they may be spoken for Coin entry bezel Press down handle bottle door cooling unit I will start listing everything on ebay on 11-13-11 if you need or are looking for something speak up Joey Title: Re: Large Door 110 Parting Out Post by: MCarter on November 13, 2011, 09:09:13 am How much for the coin mech?
Title: Re: Large Door 110 Parting Out Post by: coke_and_stuff on November 13, 2011, 09:35:12 am $375.00 shipped
Joey Title: Re: Large Door 110 Parting Out Post by: Ken R on November 13, 2011, 11:07:54 am There's another thread on a guy that was looking for a ribbed coin door for a 110. It's just a few threads below this one, started by collecture. You might contact him to see if still looking for one if that's what this one has....unless they've already contacted you on it.
Title: Re: Large Door 110 Parting Out Post by: MoonDawg on November 13, 2011, 11:19:54 am Ribbed door is only found on small coin mech. machines Ken, Joey has the rarer large door version.
Title: Re: Large Door 110 Parting Out Post by: Ken R on November 13, 2011, 12:00:53 pm Thanks. Guess I'm not really familiar with the difference between the two as have never really seen them to compare. Now I know there is a difference!!! Learn something new everyday!! haha. Thanks again! :happydrinkers:
Title: Re: Large Door 110 Parting Out Post by: coke_and_stuff on November 13, 2011, 12:36:17 pm Most parts are on ebay email me direct at coke_and_stuff@yahoo.com for a better deal
http://www.ebay.com/sch/coke_and_stuff/m.html?_ipg=50&_sop=10&_rdc=1 Coin door has already sold! Joey Title: Re: Large Door 110 Parting Out Post by: Swachtelncc on November 13, 2011, 02:29:18 pm You wouldn't have an extra coin door to fit a vendo 81D would u. just saw u sold this one
Title: Re: Large Door 110 Parting Out Post by: coke_and_stuff on November 13, 2011, 04:19:40 pm Sorry I sure dont.
Joey Title: Re: Large Door 110 Parting Out Post by: Slapshot42 on November 14, 2011, 03:06:56 am Ribbed door is only found on small coin mech. machines Ken, Joey has the rarer large door version. Glen, I have a Vendo 110 large door coin mechanism, non change giver. Suggested value? Whey were the large door's rare? Newbie here.... Title: Re: Large Door 110 Parting Out Post by: coke_and_stuff on November 14, 2011, 08:59:15 am Not rare just desirable parts wise as they fit a large number of highly collectible machines.
Joey Title: Re: Large Door 110 Parting Out Post by: SIGNGUY on November 14, 2011, 10:51:00 am You wouldn't have an extra coin door to fit a vendo 81D would u. just saw u sold this one I might have one available... if intersted..John Title: Re: Large Door 110 Parting Out Post by: Swachtelncc on November 14, 2011, 03:33:53 pm I might have one available... if intersted.. John Yes I am interested. Title: Re: Large Door 110 Parting Out Post by: Matt on November 14, 2011, 09:11:43 pm Ribbed door is only found on small coin mech. machines Ken, Joey has the rarer large door version. Can someone explain what is meant by "ribbed door?" Title: Re: Large Door 110 Parting Out Post by: coke_and_stuff on November 14, 2011, 09:26:31 pm On the early Vendo 39s and 110s there was a rib or rasied line stamped into the coin door, On the 39s the rib ran off the coin door into the main front door where "Ie Cold" was embossed.
Joey Title: Re: Large Door 110 Parting Out Post by: MoonDawg on November 14, 2011, 11:29:51 pm There is one for sale on Ebay now.
http://www.ebay.com/itm/Vintage-Coca-Cola-Machine-V-39-Coin-Door-/290632723121?pt=LH_DefaultDomain_0&hash=item43ab0f6ab1 (http://www.ebay.com/itm/Vintage-Coca-Cola-Machine-V-39-Coin-Door-/290632723121?pt=LH_DefaultDomain_0&hash=item43ab0f6ab1) Title: Re: Large Door 110 Parting Out Post by: MoonDawg on November 14, 2011, 11:34:25 pm I might have one available... if intersted.. John If John doesn't have one, I do. Title: Re: Large Door 110 Parting Out Post by: Swachtelncc on November 15, 2011, 03:09:47 pm There is one for sale on Ebay now. http://www.ebay.com/itm/Vintage-Coca-Cola-Machine-V-39-Coin-Door-/290632723121?pt=LH_DefaultDomain_0&hash=item43ab0f6ab1 (http://www.ebay.com/itm/Vintage-Coca-Cola-Machine-V-39-Coin-Door-/290632723121?pt=LH_DefaultDomain_0&hash=item43ab0f6ab1) Stupid newbie question? Will the 39 fit a 81D? Title: Re: Large Door 110 Parting Out Post by: SIGNGUY on November 15, 2011, 03:22:03 pm No it will not .
The 81D features the Large Coin Door, the 39 features the smaller door as seen on the 81a and 81b machines. I know you contacted me about my door i have.. digging through stuff to find it , will know tonight and can send you photos of it. Thanks John Title: Re: Large Door 110 Parting Out Post by: BrianS on December 06, 2011, 01:28:50 am Joey,
Looking for a couple large door parts. Need 2 cap catchers and one of the plastic coin catchers. I know you can get these new, but prefer an original. Still have any from your 110? Also, what do you guys use for the correct change lens opening if you have a non change giving coin mech? I have not seen a verion of the lens that is just blank. Thanks Title: Re: Large Door 110 Parting Out Post by: coke_and_stuff on December 07, 2011, 04:11:08 pm All Sold, Only thing left is the main front door and the cabinet, rest is gone.
Joey |