|
Title: National Rejectors model 8-56-000 type B Post by: drscotti on November 09, 2011, 06:40:41 am Hello!
I have a National Rejectors model 8-56-000 type B. Can anyone help with a manual or operating information? Appears someone has taken this one apart before and I'm trying to make sure it is back together correctly, and how figure out how it works. Thanks, Scotti Title: Re: National Rejectors model 8-56-000 type B Post by: drscotti on November 09, 2011, 04:03:45 pm Here are a few photos of it.
(http://inlinethumb32.webshots.com/47583/2933519550102776694S500x500Q85.jpg) (http://entertainment.webshots.com/photo/2933519550102776694FvxEzb) (http://inlinethumb08.webshots.com/14535/2070687530102776694S500x500Q85.jpg) (http://entertainment.webshots.com/photo/2070687530102776694ZSOhqV) Title: Re: National Rejectors model 8-56-000 type B Post by: Ken R on November 09, 2011, 04:11:56 pm You may be able to find a manual for it if you log into the SMC homepage (different from this login) and go to the downloads section. There are several different pubs there and one might fit this one.
Ken Title: Re: National Rejectors model 8-56-000 type B Post by: Creighton on November 09, 2011, 05:53:05 pm Pulled the coin mech from my SV. It is marked Coin Acceptors Inc. Appears to be the same or very close to your National.
I'm the dull crayon in the box on electronic mechs. Hope the wiser ones will chime in. Sorry for the background clutter. Pics attached with any luck :-) Creighton Title: Re: National Rejectors model 8-56-000 type B Post by: Creighton on November 09, 2011, 06:13:16 pm Couple more pics. Getting that mech up and running might be tough. In the meantime pretty sure the Coinco S75-9800 A/B would be a drop in replacement.
Would resin SV wings that could be painted be ok or metal castings? Metal gets spendy quick. Creighton Title: Re: National Rejectors model 8-56-000 type B Post by: vend_dr on November 09, 2011, 08:01:12 pm I have the actual operation and service manual for this changer. Yours has the optional extended nickle payout tube - the original was shorter. PM me a email address and I can send it.
Jim - if you don't have it in the download section I can send it to you so you can post it. Title: Re: National Rejectors model 8-56-000 type B Post by: Jim on November 09, 2011, 08:18:08 pm vend_dr,
I do not have this manual... Title: Re: National Rejectors model 8-56-000 type B Post by: drscotti on November 09, 2011, 10:13:05 pm That would be great to see vend_dr, were you referring to the National Rejector or the Coinco??
thanks in advance! Scotti Title: Re: National Rejectors model 8-56-000 type B Post by: drscotti on November 09, 2011, 10:15:36 pm resin would be fine Creighton, If someone has one to make a mold from then it could be re-popped pretty easy.
Keep me updated, Scotti Title: Re: National Rejectors model 8-56-000 type B Post by: vend_dr on November 10, 2011, 08:42:48 pm That would be great to see vend_dr, were you referring to the National Rejector or the Coinco?? thanks in advance! Scotti I have the National manual. Jim - I sent you the PDF |