SMC Discussion Areas

The Coin Return => Estimated Values => Topic started by: vendobaldtops on June 07, 2004, 01:01:00 am



Title: Westinghouse countertop
Post by: vendobaldtops on June 07, 2004, 01:01:00 am
Hi,
I just picked up a Westinghouse countertop today and was wondering what it might be worth and how rare are they?  I know more about upright machines but have gotten into the ice coolers recently.

This cooler was not cut in half from a Jr, it has handles on both sides, and it does not have a drain.  Inside the cooler, the tub looks like it had something where a tray could be laid across...somewhat like the picnic coolers.  Solid cooler, but amateur repaint.  Thanks for your help!


Title: Westinghouse countertop
Post by: MoonDawg on June 07, 2004, 10:33:08 am
Wow, I think you may have found a Westinghouse Half Junior.   I have only seen 1 before.   Rare!!!!
     Can you get a picture for us?


Title: Westinghouse countertop
Post by: vendobaldtops on June 07, 2004, 09:44:11 pm
Glen, attached are some pics of the machine.  It was repainted at one time but is solid..definitely not a cut-off Jr...there are re-enforced metal strips along the bottom...


Title: Westinghouse countertop
Post by: vendobaldtops on June 07, 2004, 09:44:59 pm
Another side...


Title: Westinghouse countertop
Post by: vendobaldtops on June 07, 2004, 09:46:04 pm
inside


Title: Westinghouse countertop
Post by: racerx45 on June 07, 2004, 11:23:39 pm
Quote (vendobaldtops @ June 07 2004,10:44)
Glen, attached are some pics of the machine.  It was repainted at one time but is solid..definitely not a cut-off Jr...there are re-enforced metal strips along the bottom...

Sorry to say this but I don’t think it is a Westinghouse “Half Junior”. First the embossing should be much smaller and the handles should fold into a recess. Also the size is off, the “Half” is the same width as a full size Junior but is almost a full 6” narrower ( Half should be 14” high, 25 ½ ” wide, 12” deep, Full size Junior 35 ¼ ” high, 25 ½ ” wide, 17 ¾” deep”) Lastly there should not be a lip around the bottom edge, it looks like there is a lip around the bottom in your pictures.


Title: Westinghouse countertop
Post by: vendobaldtops on June 07, 2004, 11:33:28 pm
Steven,
Do you have a half junior or a picture of one that you can share?  I am curious to see what one looks like...I'll go out and measure mine to see what the dimensions are...thanks.  How was Gas Bash last weekend?


Title: Westinghouse countertop
Post by: racerx45 on June 07, 2004, 11:47:10 pm
I can post a picture as soon as my ISP get my site back up :(


Title: Westinghouse countertop
Post by: vendobaldtops on June 08, 2004, 12:00:27 am
Steve,

Thanks for your help...I believe you are right that this was cut off from a "normal" Jr...but some guy (assuming) spent a heck of a lot of time forming the metal bends on the bottom and making a new liner and smoothing out all the metal.

Luckily, I didn't pay an arm and a leg for it...and it can now be advertised as a cut-off Jr. when I put it on eBay  :p .  No false advertising!

Still would appreciate a pic of an original when your site is up again.  Thanks!


Title: Westinghouse countertop
Post by: on June 08, 2004, 10:48:47 am
vendobald: Dunno about the JR But hey Post more pictures of the area its stored in, I love to see peoples collections :p