|
Title: Westinghouse Bow Chest WD-10 Cooler ( Capcatcher needed) Post by: Slapshot42 on August 06, 2011, 01:37:51 pm Hi,
Brand new to the site looking for a few parts to complete a full restoration on my first machine. I have a Westinghouse Bow Chest Cooler (WD-10) I'm looking for the cap-catcher that goes on the front. I believe the mount is 10 1/2 inches from post to post for the mounting brackets which are already on the cooler. Any help or or somebody with one please let me know. Thanks! Jared Title: Re: Westinghouse Bow Chest WD-10 Cooler ( Capcatcher needed) Post by: Creighton on August 06, 2011, 06:51:11 pm Hi Jared,
Welcome to the board! Will watch for your parts. Good to see another WA. member. If you have the misfortune of going to Spokane... Let me know, Creighton Title: Re: Westinghouse Bow Chest WD-10 Cooler ( Capcatcher needed) Post by: Slapshot42 on August 09, 2011, 10:52:15 pm Creighton,
I have only been to Spokane twice. There isn't too much there I couldn't live without. Anyways, thanks for the reply. What kinda machines do you have, or what are you working on? I picked up a Vendo -110 during the restoration of the WD-10. I couldn't pass it up. I got the 110 for $500.00 complete. It was owned by the same person for 35 years, and before that it was only owned by a old Seattle Fire Dept. in which it was indoors. It cools, and came with a large door coin mech, keys, etc. I will probably break this one down this late fall, it should be a good winter project. The WD-10 is nearly done, just waiting for the last few parts to trickle in so I can start to put it back together. All the body work is complete, paint, and pinstripe. Compressor is with Eric and Global. All for now, Jared Title: Re: Westinghouse Bow Chest WD-10 Cooler ( Capcatcher needed) Post by: koolit on August 24, 2011, 06:47:37 am Jared,
I have a WD-10 cap catcher if your interested. Included is the stainless steel bezel. I want $75 + ship . Let me know. Erik Title: Re: Westinghouse Bow Chest WD-10 Cooler ( Capcatcher needed) Post by: Slapshot42 on August 24, 2011, 08:41:06 am Could you send some pics? Also measure the back of the catcher were the holes are should be 10 1/2 inches. Very interested.
Jared |