SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Pre 60's Machines & Coolers => Topic started by: thouchins on May 03, 2011, 03:59:34 pm



Title: HELP needed with removing inside liner V-39
Post by: thouchins on May 03, 2011, 03:59:34 pm
I've removed the drum and now I need to get ready to remove the inside liner so I can install new insulation.
Can some one give me step-by-step procedures on doing this?

Thanks,
Terry


Title: Re: HELP needed with removing inside liner V-39
Post by: MoonDawg on May 03, 2011, 04:17:30 pm
       You will have to remove the latch reciever first. Then look for the little retainer clips around 3 sides of the liner. Push the breaker strips to the outside of the machine far enough to clear those clips and remove the strips. The nuts holding the liner will then be exposed.


Title: Re: HELP needed with removing inside liner V-39
Post by: thouchins on May 03, 2011, 04:23:51 pm
What I've removed so far is the 6 bolts on the back wall of the liner & the 6 bolts holding the drum spindle on.
So there are still more bolts to come off?

Terry


Title: Re: HELP needed with removing inside liner V-39
Post by: SIGNGUY on May 03, 2011, 07:55:39 pm
Like Glen said,
Behind the black plastic on the outside, refferred to as the breaker strips. remove them as he indicated and there will be 4 more nuts to remove from permantely mounted bolts.. once those are removed, it should come right out.


Title: Re: HELP needed with removing inside liner V-39
Post by: MoonDawg on May 03, 2011, 08:59:49 pm
       You will also have to cut the drain tube shorter to remove the liner


Title: Re: HELP needed with removing inside liner V-39
Post by: mznb1u on May 04, 2011, 12:40:28 am
 The nuts . . . will then be exposed.

Make sure there are no kids around!  :laugh: 8) :biggrin:

I know--very sophomoric but I could not resist at this late hour!

 :drinking: Tim :drinking: