SMC Discussion Areas

The issue is that it always rejects dimes.  Coin mech is set to vend at ten cents.  When two nickels are inserted, machine will vend, when a quarter is inserted, machine will vend, but only give two nickels for change.  When not plugged in, the dime will go out the same side as nickels and quarters, which would be the coin collector side, but when it is plugged in, the dimes always get rejected.  The spring arm is missing from middle switch, and I am wondering if this is causing the issue.  I believe it is a coinco 9800, but I have included pictures.  Any help would be greatly appreciated. *UPDATE* - just ordered new mech off ebay - if anyone is interested in getting this from me for parts or to repair themselves, please let me know.

Not sure if it will help, but on my 7up machine I have to have the change tubes filled up half to three quarters full before it will vend or catch dimes.  There are others who can tell you more about the coin mechs, I just know that works on mine.

Red, thanks for the tip, but unfortunately, the nickel tubes are completely full.  I have a new one on the way, should be here next tuesday.  thanks again though.

Cool, hope that it works out for you.

Johnie G is the expert on that type of coin mech.  Welcome aboard!

 :drinking: Tim :drinking:

I was looking around and found that Johnie G was the man for this, but was afraid to pm him about it.  I will not send someone a pm without them first asking to do this.  I have bought a new one from ebay, now just trying to find someone in need of one for parts or repair to get rid of my old one.

No problem insofar as sending me a PM, that's what it's there for, this looks like what they called ( by Coinco) a 9800-"conversion", it's a metal bodied mech with brass nickels tubes & quite frankly a pain in the a$$ to work on, you're better off with a late model S75/9800 A or B model...Unless you need this type of mech for a nostalgic restoration of the machine. ( they can be repaired)...