|
Title: Slider shelf length Post by: BrianS on March 20, 2011, 04:42:16 pm Getting the shelves for my v56 ready for powder coating and noticed that I have one slightly longer than the rest. All attributes of the shelves and the spring loaded insert appear to be the same except for the length. Could this shelf actually be for an 81?
Title: Re: Slider shelf length Post by: cokecolaman on March 20, 2011, 04:49:29 pm I think so
Title: Re: Slider shelf length Post by: collecture on March 20, 2011, 05:00:10 pm Probably a V-56 shelf
Title: Re: Slider shelf length Post by: MoonDawg on March 20, 2011, 06:52:40 pm I'm quite sure it is for an 81. I'll bet someone would gladly trade with you.
Title: Re: Slider shelf length Post by: Jim on March 20, 2011, 06:56:45 pm Brian,
Did you show your powder-coater the puller...? I'd be careful as this may not make through the baking process... I just did my V-81 shelves and I removed the pulleys just to be safe. If you opt to leave them on; let us know how they do through the process! Title: Re: Slider shelf length Post by: collecture on March 20, 2011, 07:24:17 pm I guess I should pay more attention to what I write :blush:
I meant to say 81.... Title: Re: Slider shelf length Post by: cokecolaman on March 20, 2011, 07:25:27 pm I tried powder coating with the pulleys on a few shelves ( I had some extra at the time) and off of a few shelves...most of the ones left on were warped and not usable or stuck...I would always take them off now knowing how mine turned out.
Title: Re: Slider shelf length Post by: BrianS on March 20, 2011, 09:49:46 pm I appreciate the heads up on the roller wheel. I had actually just finished drilling out the rivets to remove the wheels when I restacked the shelves and noticed the one longer one. I have a full set of the correct size sliders for the 56. Will probably go ahead and have the extra powder coated as well. Won't really cost anything extra and I am doing the 81 at the same time in the same color scheme, so it will match if I ever need it. I decided to remove the wheels after reading the excellent discussion on it in Moondawg's post from a ways back.
http://soda-machines.com/discussions/index.php/topic,8421.0.html |