|
Title: Coinco s75- 9800b Cav 64FS Post by: ScottP on February 13, 2011, 06:55:34 pm Have the machine cooling now, but the bottles will not release, I am not sure if the coin mechanism is working or not. When you plug the machine in, the coin mech clicks. That is the only sound it makes. I have it set to 10 cents and the bottles will not release. We took the entire bottle rack out and cleaned it up and oiled the springs, etc. And it will manually work/release when you push the relay in that is located at the bottom of the rack. Also, the switch at the bottom of the coin mechanism does not do anything when you push it one way or the other. Thanks in advance for the help.
Title: Re: Coinco s75- 9800b Cav 64FS Post by: mznb1u on February 13, 2011, 07:57:40 pm Sounds like a question for JohnieG. He is the expert on that type of coin mech.
You will be happy with that machine once you get everything operating properly. Great everyday user machine! :drinking: Tim :drinking: Title: Re: Coinco s75- 9800b Cav 64FS Post by: johnieG on February 13, 2011, 09:25:35 pm First, test the machines vending circuit by momentarily jumpering pins #1 & #3 with an insulated jumper wire, you should here the vending solenoid "click" & release the stack to vend. if not, there's a problem in the wiring, if it does allow a vend to be made, then the troubles in the coinmech.
Title: Re: Coinco s75- 9800b Cav 64FS Post by: ScottP on February 13, 2011, 09:35:30 pm Johnie g, I am a complete newbie to this, with this being my first machine, so I apologize for asking an elementary question but can you point me in the right direction of the pins 1 and 3 on the machine?
Title: Re: Coinco s75- 9800b Cav 64FS Post by: Jim on February 14, 2011, 07:56:48 am Check this "Pinned" topic in the Coin Mechanism Category (http://soda-machines.com/discussions/index.php/board,6.0.html): "Free Play switch (http://soda-machines.com/discussions/index.php/topic,871.70.html)"
JohnieG has provided an image and details on pin configuration... Title: Re: Coinco s75- 9800b Cav 64FS Post by: ScottP on February 14, 2011, 10:47:41 am Thanks Jim, will give it a try this afternoon.
Scott Title: Re: Coinco s75- 9800b Cav 64FS Post by: ScottP on February 14, 2011, 08:59:08 pm Johnieg, used the jumper and it released the stack. Can you take a look at my coin mechanism? Let me know if you have time and what the next step would be. Thanks Jim for the diagram.
Scott Title: Re: Coinco s75- 9800b Cav 64FS Post by: johnieG on February 14, 2011, 09:34:37 pm just shoot me a PM /personal message & we can exchange contact info.
Title: Re: Coinco s75- 9800b Cav 64FS Post by: ScottP on February 14, 2011, 09:53:37 pm Thanks, just sent it to you.
Title: Re: Coinco s75- 9800b Cav 64FS Post by: johnieG on February 15, 2011, 02:53:01 pm haven't received it yet... :oops:
Title: Re: Coinco s75- 9800b Cav 64FS Post by: ScottP on February 15, 2011, 03:04:31 pm :darn:, Will try again, if you do not receive, my emial is msperry55@msn.com.
|