|
Title: VENDORLATOR DRAIN TUBE NEEDED Post by: FRESNO MAN on January 06, 2011, 06:21:19 pm I'm in need of a useable drain tube for a Vendo 3D-33. Anyone?
Title: Re: VENDORLATOR DRAIN TUBE NEEDED Post by: Marvin on January 06, 2011, 09:10:03 pm I made a few up recently. I think I used 1/2" ID copper pipe. Seems like the OD needed to be 5/8". I bought a cheap 9.99 tube flarer to flare the end and soldered it to the liner. If you know a plumber it wouldn't take him 5 minutes to make it.
I have not installed the liner to the machine yet. The old one was threaded on the outside with a not holding it to the cabinet. I don't see any need for it to be held the same way. The 33 had a 90* catch pan that directed the water towards the front to go to the condensate pan. My pan is rusted through, so I plan on just using a 90* fitting and directing it to the catch pan. Marvin |