|
Title: wire connector port Post by: ercin13 on December 21, 2010, 10:21:19 pm i had an issue with my vendorlator 5 sign light and traced the problem to this connector. there was a loose wire which came loose after i wiggled it. i cut this connector out after i color taped the wires. i then put wire nuts on to see if light works and it does. i need to get a new new connector so it dont look like a mess. can you get these at home depot or lowes? or is there something more modern that works better? i dont have any slack coming from beneath so i would like to get something in a snap form. just checking what you guys might reccomend.
also i had a bad ballast and had to learn the hard way about buying 2 flourescents before i put in a new ballast. now i have 7 less dollars for xmas. should have did my forum search before that screw up. (http://i734.photobucket.com/albums/ww347/ewade71/pepsi009-1.jpg) Title: Re: wire connector port Post by: briandr1 on December 21, 2010, 11:41:13 pm Try radio shack or an electrical supply store like commercial electronics they should have what you need.
Title: Re: wire connector port Post by: bubba on December 22, 2010, 01:28:57 pm Radio shack may carry the connector.. Otherwise, look at Mouser.com for it. Its a .093 molex connector male and female.
Title: Re: wire connector port Post by: ercin13 on December 22, 2010, 07:08:28 pm heres what i what i picked up today at radio shack . went to lowes , advanced auto, and 2 local electrical supply stores but had no luck. hope these work, they look flimsy.
(http://i734.photobucket.com/albums/ww347/ewade71/pepsi001.jpg) Fixed the link for ya---Bubba |