|
Title: Looking for a 5c rejector and the holder. Post by: Larry on December 10, 2010, 12:19:19 pm Does anyone have a 5c rejector and the base that the rejector attaches to? The coin mech is 3.5 wide by 4 high.
It's for a 1950's Bally game. Title: Re: Looking for a 5c rejector and the holder. Post by: Jim on December 10, 2010, 05:02:49 pm I'll check over this weekend to see if I still have a couple of pinball mechs...
I know I do not have the mounting bracket. Title: Re: Looking for a 5c rejector and the holder. Post by: collecture on December 10, 2010, 07:16:03 pm I probably have both, but I'll have to check. What are the bracket's dimensions?
What is wrong with the one pictured? Title: Re: Looking for a 5c rejector and the holder. Post by: collecture on December 11, 2010, 06:47:57 pm Larry, I have this rejector, but no bracket; however, if you have a bracket, a copy (or reasonable facsimile) shouldn't be difficult to fabricate.
Title: Re: Looking for a 5c rejector and the holder. Post by: Larry on December 12, 2010, 12:23:32 pm Sorry for not getting back. Just got a new computer and it wouldn't let me log in. I had to use my old name and password. It took awhile to remember it.
I found a mech that should work. The bracket in the picture is a guys machine in Wisconsin. He sent me pictures awhile ago. I'm waiting for dimension for the bracket and dimensions for a solenoid plunger from a fellow in New York. I was hoping that I could use an existing bracket, but I will probably have to rig one up. I have a Popperette bracket but it wont work. I may just use a straight tube to feed the nickle to the playfield. The nickle is actually used in the game. Thanks for looking. Title: Re: Looking for a 5c rejector and the holder. Post by: Jim on December 12, 2010, 05:01:07 pm Larry,
I apologize but cannot find the one or two I think I have... Title: Re: Looking for a 5c rejector and the holder. Post by: sodaworks on December 15, 2010, 08:54:09 pm I have three of these slug rejectors.
|