|
Title: Main Door Seal for a Cavalier CSS-96F Post by: tideluva on November 22, 2010, 07:47:13 pm All,
I need a bottom door seal for a Cavalier CSS-96F. Can anyone help me with this? Title: Re: Main Door Seal for a Cavalier CSS-96F Post by: Jim on November 22, 2010, 09:08:28 pm Have you checked any of our Sponsors, such as The Soda Jerk Works or Fun-Tronics...?
Title: Re: Main Door Seal for a Cavalier CSS-96F Post by: tideluva on November 23, 2010, 07:59:01 am I have looked at their online catalogs and cannot find the one that I need. Granted, there may be a retrofit that will work.
Title: Re: Main Door Seal for a Cavalier CSS-96F Post by: Pat Pixley on November 23, 2010, 11:15:57 am You know if you contact Steve Jebb over at soda Jerk works he may have something in the back room or
Rod over at Funtronics may have something in the back room call and ask , not everything is listed in the catalogs :smile:. Title: Re: Main Door Seal for a Cavalier CSS-96F Post by: loman4ec on November 23, 2010, 04:54:53 pm and if all you need is the bottom it is the same as the cs64 however the sides are different
Title: Re: Main Door Seal for a Cavalier CSS-96F Post by: tideluva on November 24, 2010, 08:48:08 am Ok, I found out it is an inner seal that I need and not the main door seal. Doh! The seal that I am talking about has 4 pieces that goes between the galvanized "box" that holds the bottles and the outer shell. It is attached by screws going through the galvanized box through the seal and then the outer shell. As you can tell, I'm a newbie and ignorant to what is what. I had to replace the bottom of the galvanized box due to rust, and the seal was eaten up and damaged so I cannot use the bottom seal. I am not concerned with authenticity, I just want it to work and be somewhat efficient. Any suggestions? By the way, thanks for the replies!
Title: Re: Main Door Seal for a Cavalier CSS-96F Post by: collecture on November 24, 2010, 09:01:53 am I am not familiar at all with the Cavalier 64 or 96, but maybe take a look at the Westinghouse WC-44 gaskets. Soda Jerk Works carries it and possibly Fun-Tronics.
Title: Re: Main Door Seal for a Cavalier CSS-96F Post by: tideluva on November 24, 2010, 09:44:29 am Here is a picture of where/what I am talking about.
Title: Re: Main Door Seal for a Cavalier CSS-96F Post by: collecture on November 24, 2010, 10:06:43 am I know what part you are talking about, but I am not familair with the exact shape of the gasket.
The Westinghouse gasket is kind of similar in that it goes between the main cabinet and the liner. http://www.sodajerkworks.com/xcart/customer/product.php?productid=753&cat=&page=2 Call and maybe Steve will sell just one piece. |