|
Title: Vendo 90 stuck compressor Post by: rstang50 on October 21, 2010, 04:43:53 pm I have a Vendo 90 that sat for a year. It ran great before but it seems the compressor is stuck. It tries to start but draws too much power and stops. Would a tap on the housing help free it up? Would a hard start kit help and which one would work for this 1/4 hp? Any advise would help.
Title: Re: Vendo 90 stuck compressor Post by: johnieG on October 21, 2010, 06:27:33 pm Try a hard start (3-in-1) starter/boost 1/3-1/4 HP SUPCO makes it & it's available from Grainger supply.
http://www.grainger.com/Grainger/SUPCO-Hard-Start-Assist-Kit-4E238?Pid=search (http://www.grainger.com/Grainger/SUPCO-Hard-Start-Assist-Kit-4E238?Pid=search) Title: Re: Vendo 90 stuck compressor Post by: rstang50 on October 25, 2010, 10:09:34 pm Now What do I do? I took out the whole deck. I installed a new wire harness. The compressor seems to be working but it is not cooling. The vertical tube at the end of the condensor gets a little cold but the rest of the tubes do not. Who can work on these systems. I would like to find someone in the Chicago area.
|