|
Title: Cavalier wiring for compressor, etc. Post by: tarps3 on June 03, 2010, 09:05:25 am Hi all,
I have a CS-64C Coke machine that works perfectly...well it DID until this weekend. My main power chord "rotted" in 2 so I removed the entire cooling unit in order to re-wire it. All the original wiring is brittle and the insulation is cracked. Here's my issue: all of the wiring for the cooling unit ends (or originates) in a circular molded plastic junction block. The lettering on it says "Lyall Electric" and it's about 1.5" in diameter. It is mounted to a bracket on the side of the cooling unit and all the wires connect to it internally. There is no way to disassemble the thing. Is there an after-market replacement for this (Lyall apparently is out of business)? Can I wire the unit without this unit? (i.e. installing a modern junction block and wiring everything to it? thanks Casey Title: Re: Cavalier wiring for compressor, etc. Post by: collecture on June 03, 2010, 01:20:20 pm You can makeshift a junction block - some people have used outlet boxes normally used in the home.
But I would buy a wiring harness from one of the suppliers - there are links to them from SMC here. www.fun-tronicsllc.com or www.sodajerkworks.com |