|
Title: V63 Vending part missing???? Post by: jenkine on March 24, 2010, 11:17:49 am I recently noticed on my V63 that there seems to be a part missing. I knew the machine was set to free vend but I did not realize the part was missing until I got home. Inside the cooler box and just below the bottom beverage dispensing hole, there is a square box that the electrical cord is connected to. My machine seems to be missing that entire box, there is no electical cord running to that part of the machine. The machine is cooling good and the drinks vend fine for free but what is the part and where would I get one? The machine does have the electrical coin mechanism inside the door. I will try and attach a picture of this part from another machine. Thanks!
Title: Re: V63 Vending part missing???? Post by: tkaz on March 24, 2010, 11:27:48 am There are two screws on the front of that box, you should be able to take them off and pull the cover off to see whats behind it. That is where the vend solenoid and linkage is normally. Does the electrical cord that goes there attach to nothing?
Title: Re: V63 Vending part missing???? Post by: jenkine on March 24, 2010, 11:32:24 am This picture is not my machine. I was just trying to show what was missing on mine. My machine is missing this entire box and no electricity is running to that part...Thanks.
Title: Re: V63 Vending part missing???? Post by: Pat Pixley on March 24, 2010, 01:31:38 pm I may have what you want when I get home tonight I'll go take a look
and get back to you. :smile: Title: Re: V63 Vending part missing???? Post by: jenkine on March 24, 2010, 01:36:21 pm Great. Thanks.
Title: Re: V63 Vending part missing???? Post by: tkaz on March 24, 2010, 08:05:22 pm I guess it would help if I read the WHOLE post...
Here are some photos of what is underneath the box on a normal machine, I took them when I disassembled my V90 Title: Re: V63 Vending part missing???? Post by: Pat Pixley on March 24, 2010, 10:07:37 pm Ok is what your looking for What in tkaz 's photo's and do you need a coin mech.
Can you post a picture of what you have the inside the bottle rack mainly. Title: Re: V63 Vending part missing???? Post by: jenkine on March 25, 2010, 09:05:38 am I will take a pic of the inside of my machine tonight.....I do have a coin mech but I don't have a vend solenoid and some other parts I think.....
Title: Re: V63 Vending part missing???? Post by: jenkine on March 25, 2010, 07:57:29 pm here is a pic.....let me know what you think......
Title: Re: V63 Vending part missing???? Post by: jenkine on March 25, 2010, 08:07:28 pm another pic
Title: Re: V63 Vending part missing???? Post by: Pat Pixley on March 25, 2010, 08:44:30 pm Yes I have what you want it is off a Vendo 90 rack .
Title: Re: V63 Vending part missing???? Post by: johnieG on March 25, 2010, 08:45:11 pm man, you're missing the whole solenoid, carrier switch assembly, and the mounting bracket too... :Oo:
Title: Re: V63 Vending part missing???? Post by: Pat Pixley on March 25, 2010, 08:56:31 pm Ok I just ran out to the Garage and looked at that rack and popped it open and Mine is missing the
solenoid and carrier switch assembly :Oo: . you may want to look for a rack ? Title: Re: V63 Vending part missing???? Post by: jenkine on March 25, 2010, 09:07:01 pm Going to need some help here. What are you referring you when you say rack?
Title: Re: V63 Vending part missing???? Post by: Pat Pixley on March 26, 2010, 09:43:12 am I will send you what I have you will have to get a solenoid .
Just sent you a PM :smile:. |