|
Title: Where to buy? Help needed! Post by: collecture on January 22, 2010, 12:57:41 pm I am restoring a Vendo Coin Changer mechanism for a customer. He is missing one of the cup washers used to attach the bezels to the cover. I have searched around and can't find one.
Anybody have one or know anywhere to buy one? Thanks! Title: Re: Where to buy? Help needed! Post by: bubba on January 22, 2010, 01:53:52 pm Is this what you are referring to...
http://www.mcmaster.com/#trim-washers/=5hkzwd Title: Re: Where to buy? Help needed! Post by: MCarter on January 22, 2010, 01:58:03 pm Tom,
If you find them lmk. I need some too. Title: Re: Where to buy? Help needed! Post by: BrianB on January 22, 2010, 02:26:51 pm Funtonics has them. $3.00 ea.
http://www.fun-tronicsllc.com/store.php?crn=257&rn=1040&action=show_detail (http://www.fun-tronicsllc.com/store.php?crn=257&rn=1040&action=show_detail) Title: Re: Where to buy? Help needed! Post by: MCarter on January 22, 2010, 02:32:03 pm They are not the same. Same one's i got a Kleindofers Hardware
Title: Re: Where to buy? Help needed! Post by: vendo39 on January 22, 2010, 02:43:43 pm I have some if you need it before Funtronics is open again. I can Fedex them and you'll have them tomorrow if you really need it badly.
Also, I swear saw them at a local Ace hardware store the other day. Title: Re: Where to buy? Help needed! Post by: Crazzy Canuck on January 22, 2010, 03:06:27 pm LOL, Thought that was my website for a minute. LOL
Title: Re: Where to buy? Help needed! Post by: vendo39 on January 22, 2010, 08:29:26 pm Here are a few pics of the washer Tom and Matt are seeking.
The first object is of course just a quarter for size reference. The second object is the correct washer for a changer and the third object is a speed nut washer cap I found at the hardware store a few minutes ago. It has a taller profile but would work after drilling a small hole. That was the closest I could find but I wasn't at my favorite hardware store either. Finally, the object at the bottom is the washer Funtionics sells for machines such as the Vendo 44. It is very similar to a finish or trim washer that you can find at most hardware stores in a pinch. Title: Re: Where to buy? Help needed! Post by: collecture on January 22, 2010, 08:58:33 pm The second object is the one I am looking for (Matt too) if anyone has one. I (my customer) just needs one.
Title: Re: Where to buy? Help needed! Post by: MCarter on January 22, 2010, 09:36:46 pm I need two. and the middle one is the one i need. Thanks for the pictures
Title: Re: Where to buy? Help needed! Post by: collecture on January 22, 2010, 09:59:55 pm Yes - thanks for the picture....I was going to try and put one up, but you beat me to it.
|