|
Title: uss-8-64 Post by: houstonhusker on January 21, 2010, 09:24:27 pm I'm new to this but I picked up a cavalier today and after it ran for about an hour the coils have frozen over...I have it set on the coldest setting...is this normal...if not what's wrong with it?
Title: Re: uss-8-64 Post by: USS64K on January 21, 2010, 09:32:23 pm Put it on setting number 3 and see what happens. That is what mine is set at with no problems.
Title: Re: uss-8-64 Post by: mznb1u on January 21, 2010, 10:09:32 pm MY 64 is set on 1 and it holds the temp in the low 30's. I would be afraid to turn it any lower--I would have a mess on my hands. I'm sure those other settings are necessary for a machine outside in the hot sun.
:drinking: Tim :drinking: Title: Re: uss-8-64 Post by: houstonhusker on January 21, 2010, 10:17:30 pm What else causes these to freeze?
Title: Re: uss-8-64 Post by: Creighton on January 21, 2010, 11:45:38 pm Welcome to the board!!
Mine is at 3 as well. Is it full of product? The fan in the cabinet should run all of the time. Creighton Title: Re: uss-8-64 Post by: mznb1u on January 22, 2010, 05:27:24 am I was going to suggest to check the fans as well. If you haven't replaced them it is worth the investment. our thermostat could be bad as well. Both easy fixes.
:drinking: Tim :drinking: Title: Re: uss-8-64 Post by: houstonhusker on January 22, 2010, 09:12:48 pm Changing the temp to 3 seemed to work...thanks!
Title: Re: uss-8-64 Post by: houstonhusker on January 23, 2010, 09:33:58 am Turning it down to 3 worked..thanks guys...
|