|
Title: Glass and Plexi-Glass Door condensation Post by: MICoke on January 12, 2010, 02:06:26 pm Hi all,
Very often, I see condensation in my real glass combo plexi-glass bottle door. I am sure this has been posted several times, but why does it appear? Why within 24 hours, does this dissipate and go away? Yes, i do have a small round hole in my plexi-glass. Is this for air to escape when the door slams? Or to vent out condensation? I tried taking my hair dryer and blowing hot air in the little hole, but apparently that didn't work. Last week I took apart my door, and cleaned both glasses and the plexi-glass, which helped. But, again the condensation re-appears in time. Any suggestions on how to permanently get rid of this recurring problem? Title: Re: Glass and Plexi-Glass Door condensation Post by: mznb1u on January 12, 2010, 04:20:24 pm I have the same issue on my USS-64. I don't think there is anything that you can do about it due to the moisture in the air and the temperature gradient at the door glass. I am going to have to take my door apart because a :censored: spider climbed in through the hole in the plexiglass and built a web inside the door!
:drinking: Tim :drinking: Title: Re: Glass and Plexi-Glass Door condensation Post by: MICoke on January 12, 2010, 04:31:15 pm Does your condensation disappear from time to time?
Title: Re: Glass and Plexi-Glass Door condensation Post by: mznb1u on January 12, 2010, 07:24:44 pm It does from time to time but I have not really paid too much attention to it other than the :censored: spider!
:drinking: Tim :drinking: |