|
Title: New lines for Cornelius Diplomat pre mix machine Post by: lurker18 on January 11, 2010, 08:55:12 am Does anyone know where I can get the soda lines for this machine. I need the 8 lines (4 in 4 out, all the same). I am changing out the old lines, and the ones that are on there are from the factory, all they have for info is The Cornelius Co. no sizes. I have 1/4 inch lines for running to and from the tanks outside the machine, but the ones inside are much smaller than that, and are semi ridgid, they do bend, but will not kink. Any help, even if it is just the size, would be great.
Title: Re: New lines for Cornelius Diplomat pre mix machine Post by: johnieG on January 11, 2010, 12:56:15 pm check out your local syrup supplier, they should be able to set you up with some lines
Title: Re: New lines for Cornelius Diplomat pre mix machine Post by: vend_dr on January 11, 2010, 01:12:54 pm You could try www.bflsupply.com which supplies parts for the bottling industry.
Title: Re: New lines for Cornelius Diplomat pre mix machine Post by: lurker18 on January 11, 2010, 02:17:41 pm Thanks for the replys. I found a place in Canada that will supply me with a length of the tube, but they don't have the connectors, so I will have to cut the old hoses off the existing ones and clean then and use those.
|