SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Post 60's Machines & Coolers => Topic started by: Seanblakeley on January 07, 2010, 11:45:10 pm



Title: Vendo 192-6 selecion window/button
Post by: Seanblakeley on January 07, 2010, 11:45:10 pm
I am restoring a Vendo 192-6. I got everything working but all the selection windows are missing. I can not find them anywhere. Any Ideas???  Thanks a lot -- Sean


Title: Re: Vendo 192-6 selecion window/button
Post by: johnieG on January 08, 2010, 10:19:34 am
post a picture of the front of the machines button area, it will help people ID the parts if they have them, you can also check at http://veii.com/ (http://veii.com/) ( Vendors exchange international inc. ) , but I'd doubt  they will have anything being it's such an early model.


Title: Re: Vendo 192-6 selecion window/button
Post by: collecture on January 08, 2010, 10:36:28 am
post a picture of the front of the machines button area, it will help people ID the parts if they have them, you can also check at http://veii.com/ (http://veii.com/) ( Vendors exchange international inc. ) , but I'd doubt  they will have anything being it's such an early model.

Also measurements as some buttons might be interchangable between models


Title: Re: Vendo 192-6 selecion window/button
Post by: Seanblakeley on January 08, 2010, 05:01:09 pm
(http://i303.photobucket.com/albums/nn151/shrevestang/IMG00055.jpg)

here is a picture

I found the back to one of the buttons.  It measures 3 3/8" x 2 5/8" and the opening is 2 1/8" x 2 /15/16"

I checked VEII with no luck. i need all six buttons. Any help would be greatly appreaciated


Title: Re: Vendo 192-6 selecion window/button
Post by: Creighton on January 08, 2010, 06:34:01 pm
A friend made new buttons for my SV 1-A. If you have a plexi-glass shop nearby they could do the same. Orginals were molded but a reasonable replacement can be made. May be a bit spendy though.
Creighton


Title: Re: Vendo 192-6 selecion window/button
Post by: johnieG on January 08, 2010, 07:32:31 pm
(http://i303.photobucket.com/albums/nn151/shrevestang/IMG00055.jpg)

here is a picture

I found the back to one of the buttons.  It measures 3 3/8" x 2 5/8" and the opening is 2 1/8" x 2 /15/16"

I checked VEII with no luck. i need all six buttons. Any help would be greatly appreciated

Picture helps! I may have a complete set off of a salvaged machine including some of the flavor labels too, I'll have to get into my storage unit & check, but I know I have a set in there somewhere


Title: Re: Vendo 192-6 selecion window/button
Post by: Seanblakeley on January 08, 2010, 10:42:18 pm
If you have them that would be great.. How much would you want for them?


Title: Re: Vendo 192-6 selecion window/button
Post by: johnieG on January 14, 2010, 11:02:42 pm
Found them in my boxes of parts, I have the FIVE button version of your machine, same buttons, but only five, including the selection switches backing-plates , the complete selection harness & the coin-bezel