|
Title: Vendo 81B New wiring for light and light switch Post by: sodaman on November 02, 2009, 10:48:24 am Does anyone have step by step instructions for the rewiring of a Vendo 81B light and light switch. I need this for a guy and I don't have a 81 with the liner off right now. Any help would be appreciated. Thanks!!
Title: Re: Vendo 81B New wiring for light and light switch Post by: sodaman on November 03, 2009, 09:25:16 am The guy just gave me this info about his machine:
It has the original wiring. switch was missing. have new switch with 2 blue and 2 black wires. supposedly the exact switch for this machine. I only see 3 wires in door, a black, a blue and a white - all coming from further down the door. the white appears to have been attached to the top of the flourescent fixture by a screw. appears to have been another wire attached there also. does this help and can you tell me how the wires are supposed to be attached? thanks Title: Re: Vendo 81B New wiring for light and light switch Post by: johnieG on November 03, 2009, 12:00:17 pm I can show you a basic florescent lamp schematic if that helps... the four-wire switch is used for a manually started door lamp, (push it in until the lamp-ends glow red, then release it to light the lamp) the diagram shows the door light that uses a "F" series starter ( F2, F25..etc.)
If you want to use a 4/wire manual-start switch, connect the blue wires in place of the starter unit, & replace the black wires where the on-off switch is in the diagram. Title: Re: Vendo 81B New wiring for light and light switch Post by: sodaman on November 04, 2009, 10:31:23 am Thanks I appreciate the info!
|