SMC Discussion Areas

Here are the wire in my Lacrosse 90 model.  There are 2 cords coming from the back and the wires are labeled in the picture with what the electrical terminals are male/female (http://)

Also attached is a picture of the electrical components - the relay, switch and light bulb. (http://)

Can anyone please steer me in the right direction to hook this all up correctly?

Thanks!

I had a small Lacrosse machine years ago, as far as I recall the wiring was not much different than other machines I've seen.   I think you'll have to trace the wires to determine the exact routing, here are a couple tips-

1- the solenoid would be powered from wires on the coin mech, jones plug.
2- on the Lacrosse I had I believe the door light was constant hot since the lamp was always on.
3- not certain about the switch,  I've seen something similar on a Cavalier with a Have a Coke light, but not sure if this is the case here.  Did Lacrosse machines have a vend lamp?

Sorry I can't be of more help,

Ive got a LaCrosse out in my storage area (Brother inlaws barn)  I'll take a peak tomorrow and some pictures
to try and help you out.

 Pat

That would be so awesome!  Thanks Pat...looking forward to chilling my stock of long necks and having a machine work the right way.

Appreciate the help!

Perk

Picture of the one I cut out of a LC90 picture is a little fuzzy

Nice...that just may help me out..gonna be tough following the wires when they criss-cross, but I will see if I can figure it out.

Is there any way you could spread out the wires more to tell better which wire is going where? A shoot another pic?   It's okay if you can't.

Hate to be a pain, but I sure do appreciate your help on this!   

Pat - try putting your camera on macro - it is usually denoted by a little flower icon.

(need the spring loaded plastic door latch on that is on the lower left of the galvanized door.

needed a couple of shelves and the pre-cool shelf.  Quote fro Pepsi Perk)

  I'll tell you what I'll do  Perk   I will send that part to you with the shelves and I think I may have the
door latch   all for $20 + Shipping  cost send me a  PM  with your address and I will get the price to get it
shipped to you   2 shelves + 1 pre cooling shelve + 1 door latch  and that part of the wiring harness free.

 I think that is a pretty good deal  :smile:

  Let me know what you want to do.

Thanks for the reply Pat.   I sent you a PM to your email.  PERK