|
Title: Coin mechanisim need help Post by: on June 15, 2002, 08:12:28 pm I have a Canada dry dr pepper machine with the bottles on the side The coins drops in but go right thru and I cant get the soda Out I took the mechanisim apart and there are 3 wire levers if you press the middle one twice it works Can any one Help The model is 8-50-007 type B UMC Industries . front label says National Rejectors Hot springs arkansas
Thanks Bob Title: Coin mechanisim need help Post by: johnieG on June 30, 2002, 08:44:49 pm Sounds like the slug-rejecter (top portion that gauges if the coins are the right size,etc & aren't slugs) is probably dirty, see if it detatches from the lower half & give a good cleaning in hot soapy water & scrub with an old tooth brush along the coin path, also make sure the bent coin release isn't stuck part way down. hope it helps.
|