|
Title: Coin switch sticking Post by: Jcarter168 on January 03, 2015, 09:40:31 pm I have an NRI coin mech that only takes dimes and nickels I believe. The coin switch works but gets stuck when pressed. If I manually push it up, it will spring back up. How do I clean/fix one of these?
Title: Re: Coin switch sticking Post by: johnieG on January 03, 2015, 11:32:04 pm Sorry it's a sealed micro switch, you can't open it, but you can try some electronics contact spray cleaner & see if it gets inside to help free it up. most the time I've found that the whisker-wire isn't riding in the middle of the coin-paths arc & scrapes the side of the little channel it rides in. if so then some careful bending with a pair of needle nose piers can help true it up.
|