SMC Discussion Areas

The Coin Return => Other Coin-Op's => Topic started by: Aahgo on August 01, 2013, 07:23:06 am



Title: Jukebox question
Post by: Aahgo on August 01, 2013, 07:23:06 am
Hi Looking to get my first Juke...is a Wurlitzer 1600 a good choice for a noob?  It is working but unrestored.

Thanks,
Glenn


Title: Re: Jukebox question
Post by: Kilroy on August 01, 2013, 07:48:27 am
Working is half the battle. The 1600 was released as a 78 rpm jukebox, but Wurlitzer later  releaseda conversion kit for it to play 45's.
Imo, the Wurly mech is more of a workhorse than the Seeburgs. If you can follow aschematic, you can recap, and you SHOULd recap the amp, 60 yr old capacitors do funny things, like start fires.  if not there are shops that can do it for you.
Replacement parts can be difficult to find, but some are repopped.

If you like it, it looks to be solid, and you are willing to learn on it, go for it

Check the machine for broken plastics , missingglass, then check the vendors  if these parts are available


Title: Re: Jukebox question
Post by: bcharlton on August 01, 2013, 11:32:29 am
Jukeboxes that play 45s are a little more practical.


Just my .02

Brian


Title: Re: Jukebox question
Post by: Aahgo on August 01, 2013, 12:48:37 pm
Says it plays 45's so I assume it has the kit.


Title: Re: Jukebox question
Post by: Chris on August 01, 2013, 01:18:03 pm
Says it plays 45's so I assume it has the kit.

Make sure. Sellers have said that before because they assume. And we all know what that means....... :down:


Title: Re: Jukebox question
Post by: Kilroy on August 01, 2013, 01:59:04 pm
people see LP's ( 33 1/3) and call them 78's...or 45's.  there is a factory  1600( 1600A) that plays 45's


Title: Moving a Rockola in a minivan
Post by: Aahgo on August 19, 2013, 08:53:27 pm
okay, another noob question.  Can you safely lay a juke on it's back and move it in a minivan?

Thanks,
Glenn


Title: Re: Jukebox question
Post by: BrianS on August 19, 2013, 09:38:09 pm
I would be hesitant to lay one on its back, especailly a 1600 with that big dome.  Would hate to see it scratched or even worse.  Also, no matter how you move it you will want to secure the platter trays so they do not swing out.  I believe the playing deck also sits on springs.  There should be a hand crank to lock this down (pull it tight against the springs) to keep the deck from bouncing around while in transit.


Title: Re: Jukebox question
Post by: Kilroy on August 19, 2013, 10:03:14 pm
I've transported jukes on their back, but Brian   makes some very valid points. Use blankets, and bring painters tape to hold down the tone arm.
Check to see if the springs can be tightened down, usually it's a bolt that needs turning.  Take the records out, and fasten the platters from  flopping around.


Title: Re: Jukebox question
Post by: rayg on August 19, 2013, 10:22:31 pm
.....and Drive really careful :oh:


Title: Re: Jukebox question
Post by: Aahgo on August 20, 2013, 12:57:49 pm
Hi guys, thanks for the replies.  The first one fell through but I have a line on a different one.  I guess I'll rent a covered trailer if this one works out. :hopefull: