SMC Discussion Areas
May 02, 2024, 11:12:08 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: vendo 90 , not cooling  (Read 2916 times)
0 Members and 1 Guest are viewing this topic.
obs48167
Newbie
*
Offline Offline

Posts: 41



« on: April 21, 2014, 05:11:49 am »

HELP
vendo 90, just install a new 3in1, compressor running but its not cooling. ran for awhile and got iced up see photos. evaporator coils not really cold to touch. just the iced up  area is cold. Any ideas?

thank you
Mark
Logged

vendo -90

Seeburg M100B
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: April 21, 2014, 11:37:18 am »

I assume your evaporator fan's running & blowing air out the back of the coils?
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6224



« Reply #2 on: April 21, 2014, 11:50:11 am »

        I believe the charge is low. Maybe a leak or obstruction? Adding a 3-in-1 means compressor was already having problems.  darn

        Best advice is to locate a junk 63,90 or 126 with a working compressor and swap it out.
Logged

Glen
hipburwig
Newbie
*
Offline Offline

Posts: 25


« Reply #3 on: April 21, 2014, 06:47:05 pm »

don't know much about soda machine a/c, but I know in an automobile when the line freezes up there is usually a restriction in the line due to the compressor starting to go and the orifice tube (filter) plugs up with pieces of compressor shavings and causes the clog
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!