|
Title: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine Post by: kdog on March 08, 2019, 07:12:55 am So after 6 months of owning my Coke Vendo 56 square-top, I finally realized that the hinges on my coin door were't busted or loose, but are missing the 2 bottom screws that attach the door hinges to the machine, making the door sag when open.
Does anyone have screws that are suitable? Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine Post by: Slapshot42 on March 08, 2019, 11:02:28 am The bottle door hinge to main door is a #10 x 1/2 Phillip truss with a #10 tooth lock washer . If you're talking about the bottle door.
There are no hinges on the coin door. Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine Post by: kdog on March 10, 2019, 01:56:26 am The bottle door hinge to main door is a #10 x 1/2 Phillip truss with a #10 tooth lock washer . If you're talking about the bottle door. There are no hinges on the coin door. Well maybe its called something else. I will take a photo later and post it to show you. Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine Post by: Slapshot42 on March 10, 2019, 02:54:58 pm Pretty easy is this the the bottle door that is glass you open to vend product or the coin door that covers the coin mechanism???
Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine Post by: MoonDawg on March 10, 2019, 04:10:21 pm The coin door uses the same screw Jared described, #10 x 1/2" pan head sheet metal screw.
Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine Post by: kdog on March 13, 2019, 06:53:54 am Know what that screw is called in metric?
Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine Post by: Jim on March 13, 2019, 09:54:25 am Metric would be a different size... Standard metric sized screws will be slightly larger or smaller than, but not the same size.
|