SMC Discussion Areas
May 07, 2024, 07:24:11 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Free play  (Read 3534 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: August 09, 2003, 10:36:00 am »

I am dumb about soda machine and have just started to buy up some machines. i see your free play post-but will this work with about any type of machine?'<img'>??
i have just bought a Choice Vend model CVC 168--it does not have a coin changer-and i need to get it working.
I guess since i am here i also have a Glassco model GBV 50 ---i have two problems--i have not used the machine in some time and  went to use it and now have some dimes are stuck in it and the bottle pull won't let the bottles pull up and through and have also lost my key to the coin box and can not get a key made--i see where you said you could drill it it out but i am afraid i will mess it up--does it normally work good??? I assume i have to get the coin box open to unstick the changer -- i have never been inside it and paid any attention to it------ i can take some pics of the Choice vend and send them if need be??                                              any help would be appreciated       Bob
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: August 09, 2003, 04:26:51 pm »

Hey Bob, hi & welcome!  Yes, the free play switch a shown will work just fine on your choice-vend, and if you take your time & drill the lock carfully on the Glasco, you won't mess up the finish on the coin door at all, but you will need a new lock (with a key this time!)  ':<img:'>  Once you  get it open, you'll want to give the coin mech a good cleaning, we'll cross that bridge when we come to it.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!