SMC Discussion Areas

Trouble-Shooting => Vending Mechanisms => Topic started by: firemun on April 09, 2005, 03:21:23 pm



Title: Not sure how these things work
Post by: firemun on April 09, 2005, 03:21:23 pm
OK, got the refrigeration re wired and the machine is cooling down nicely.  Gave the Coinco a hot soapy bath.  It is noisy but know there is a post about that issue elsewhere.  Here is the problem:
THe bottle stack is not "locked" you can pull drinks at will.  I can drop money in the coin mech and here the solinoid click ...so  i think that the coin mech is ok.  Just whatver locks the gate the keep the drinks in until the money drops is not working.

I have only owned self serve or "single shot" machines like a Cav 51.  Anyone care to enlighten me?  

Thanks
jeff


Title: Not sure how these things work
Post by: Jim on April 09, 2005, 06:12:40 pm
Jeff,

We'll start with the simple things...
Have you checked the selenoid at the bottom of the vending rack to see if it isn't jammed or has been modified from a previous owner to keep on free vend...?


Title: Not sure how these things work
Post by: firemun on April 09, 2005, 06:28:54 pm
Since i posted that first message, I have been on a mission to discover the secrets of  this thing.  I located the solenoid on the bottom near the stack and it is not moving.  In the mean while I have noticed the "have a coke" light does not work either and the "correct change only light" stays lit even when there are nickels in the tubes.  So my question now:

Does that the little distribution box serve any function other than a connection point...i.e. does it contain printed circuits or other electrical components to help control all of these auxillary functions?

I have not put a volt meter to anything yet...was thinking I would wait to get a service manual.

Any thoughts or advice.
thanks
jeff


Title: Not sure how these things work
Post by: loman4ec on April 09, 2005, 10:09:15 pm
Jeff if you notice that something is broken or missing let me know as I have a spare Cavalier 64 rack for parts if you need anything off of it.


Title: Not sure how these things work
Post by: MoonDawg on April 10, 2005, 10:45:47 am
Hmmm, you said the solonoid is not moving?  That click you hear when a coin is accepted, is the solonoid energizing. Check to make sure it has it's return spring attatched.