|
Title: Vendo 44 Actuator Post by: cyberphox on October 02, 2013, 12:50:23 pm Finally picked up my dream Coca Cola memorabilia - a Vendo 44. Bought it locally here in Toronto and it seems to be all original parts.
Looking at the loading instructions and I'm pretty sure my actuator on the bottle rack could be seized? It says to turn it 1/4 turn 90 degrees to the right. It definitely doesn't move that much..maybe only 20 degrees. Should the rockers be moving at all cause they aren't? I don't want to put too much pressure on this thing and break it! Title: Re: Vendo 44 Actuator Post by: tkaz on October 02, 2013, 02:09:47 pm Welcome to the forum! My advice would be to pull the vending stack out of the machine and clean and lube the ratcheting mechanism. There are I think 6 bolts that hold it in, very easy job. Spray it down with some brake cleaner and then see if you can get it turning again.
Title: Re: Vendo 44 Actuator Post by: cyberphox on October 02, 2013, 02:22:17 pm so you mean the acutal whole bottle rack?
Title: Re: Vendo 44 Actuator Post by: tkaz on October 02, 2013, 02:54:43 pm Yes, it's pretty easy to do, see the photos in the other post you wrote in for what to expect when pulling it apart
http://soda-machines.com/discussions/index.php/topic,16597.msg130858.html#msg130858 Title: Re: Vendo 44 Actuator Post by: cyberphox on October 02, 2013, 02:55:43 pm I'll give that a shot!! Thanks Tkaz!
Title: Re: Vendo 44 Actuator Post by: cyberphox on October 03, 2013, 10:22:47 am only took 3 screws to get it out! nice...sprayed it with some wd-40 on the back and in the release spring and it still wouldn't turn...reached in cause i read the spring also goes in and out and now it seems to be turning!! woohooo!
Title: Re: Vendo 44 Actuator Post by: tkaz on October 03, 2013, 10:08:04 pm Nice! Glad to hear you got it working :happydrinkers:
Title: Re: Vendo 44 Actuator Post by: cyberphox on October 03, 2013, 10:40:16 pm Yeah ironically I got it back in and working and then 1 hour later my can rocker conversion showed up in the mail from Fun-tronics..
Doesn't look too hard to remove and put these in... Title: Re: Vendo 44 Actuator Post by: georgescustompaint on October 04, 2013, 09:30:33 am when you install the rockers, it helps to put a little bit of lube between all the contact points. The rockers will turn much easier and when vending, the coin mech crank will be nice and smooth.
I use a lube designed for cool temps, it is actually a brake lube, works good. Ultra slick makes it. Title: Re: Vendo 44 Actuator Post by: cyberphox on October 04, 2013, 12:20:45 pm Thanks! You guys actually aren't very far from me here in Toronto. I'll have to look into options into getting the cabinet sandblasted and painted as living in a condo doesn't actually allow for that!!!
|