Klixon Thermal Overload

[collecture]

If there is any way to find out the HP, I probably have one.

All I can say is look-see if the numbers on the T.O. match up. I cannot find any reference to the WB-60 compressor motor's size anywhere. Thanks!

[90grad]

Tom,

The one I have is labeled MRP36GL with either a -3A or -34 below it.  Between the terminals, it says M4V.  Also, I cannot be sure if this came off my 102.  It may have come off the 110 I just finished.  However, if this works, it's yours. 

[mznb1u]

Klixon Thermal Overload?

Is that similar to the Leopluradon?

http://www.youtube.com/watch?v=CsGYh8AacgY

We saw this one thanks to Johnie the first time around.  I thought it was a good time to bring it back!

  Tim

Shun the non-believer!

[collecture]

Well thanks everyone!
I decided it couldn't hurt to try and fix the one I had.
What was going on is the machine would fire up and cool down great; however, the problem was when it would cycle. The T-stat would cut out, but the machine wouldn't cycle back on again.

When I took the Thermal Overload out, I noticed it was chipped on the inside edge and part of the rim was missing. I must have bent the retaining wings down too much when I installed it because I don't recall it being damaged.

So I took some JB Weld and dabbed a bit of it where the chip was. As it firmed up, I could use my fingers to form the rim shape. After it hardened, I was able to file it flush. Reinstalled it and it works perfect now.

If anyone does have a T.O. like mine that they want to get rid of, I am still interested in one...LMK...Thanks!