SMC Discussion Areas
May 18, 2024, 10:30:20 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Cavalier wont stop running, bad thermostat?  (Read 4563 times)
0 Members and 1 Guest are viewing this topic.
wildwest3163
Guest
« on: January 08, 2009, 02:45:46 pm »

Hi guys, My css96 cools down pretty quickly, but wont shut off,even on the lowest setting, and freezes the beer in record time  happydrinkers

Is there something I can tweek or check, or what should I replace
Thanks
Logged
GreginNM
Soda Jerks
*****
Offline Offline

Posts: 1021



« Reply #1 on: January 08, 2009, 03:17:04 pm »

My Vendo 39 did that, and it was due to a bad thermostat.  I would bet that is your likely culprit.  You can get new ones from Soda Jerk Works at the bottom of the page or Funtronics.

Welcome to the board!

Greg
Logged

Greg

Vendo: 39B, Standard
Jacobs: 35
Ideal: 35 DP
Westinghouse: WB-66-MD, WD-10, Junior, Standard
SelectiVend: S-48 DP x 2
SelVend: S-47 7up
Pat Pixley
Guest
« Reply #2 on: January 08, 2009, 03:20:19 pm »

Replace the Thermostat    smile.

And welcome to the board  smile.
Logged
red-hungarian
10 Cent Member
***
Offline Offline

Posts: 122



« Reply #3 on: January 08, 2009, 03:34:58 pm »

The thermostats job is to cut power to the compressor when the desired temperature is attained. If this is a new machine to you, make sure the compressor it's wired through the thermostat. (Turn it to the off position, the compressor should cut off) .Check where the probe is mounted. If it's a contact type, cycle the switch between on and off a few times, you might get lucky but safest bet, replace it.
Logged

Vendo 81D
Westinghouse 10 Case Master (WD-10)
Westinghouse WH-5T
Gone: Vendo Junior, V56, CS-72, CS-96, CS-124, Pepsi V33 ,v27, v27b, 6 case/110, Westinghouse Master, Standard, Victor 3-door, Vendo 29 spin-top, I forget...
wildwest3163
Guest
« Reply #4 on: January 08, 2009, 08:01:13 pm »

Thanks guys. I checked the connections, ect, didnt change anything, but when I plugged it back in its now working properly. biggrin Maybe some water in a connection? I dont know. Guess the seals pretty tight, I unplugged it 2 days ago and the beer was still cold
Logged
BrianB
Soda Jerks
*****
Offline Offline

Posts: 2215



« Reply #5 on: January 08, 2009, 09:25:19 pm »

Great to hear that you got your machine functioning properly. Welcome aboard!! biggrin
Logged

Brian
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!