Title: Fan motor c-80-c cavilier
Post by: on August 29, 2003, 09:30:56 am
I am looking for a back up fan motor as the one in my mine hangs up every now and then. I cleaned and oiled it and it seems to be o.k at this time. But just in case.
MO.#
#5KSP51AL55H (G.E Make)4W Single phase (4PCW)
It has three mounting screws on the back to hold it in place.
O
Screw Holes 8-32?
O O
Thanks in advance!
Rick
MO.#
#5KSP51AL55H (G.E Make)4W Single phase (4PCW)
It has three mounting screws on the back to hold it in place.
O
Screw Holes 8-32?
O O
Thanks in advance!
Rick
Title: Fan motor c-80-c cavilier
Post by: Jim on August 29, 2003, 09:23:33 pm
Rick,
These are readily available through some of the Parts Suppliers as well as Grainger Supply so worrying about a back up isn't a problem... If you are having problems with the current motor, it may be time to replace it before it causes additional problems!
These are readily available through some of the Parts Suppliers as well as Grainger Supply so worrying about a back up isn't a problem... If you are having problems with the current motor, it may be time to replace it before it causes additional problems!
Title: Fan motor c-80-c cavilier
Post by: on August 31, 2003, 08:59:52 am
After looking at the Graingers book I can't seem to find a motor that will work. maybe Iam just missing it.Asthere are so many to choose from. lso I can call them but I do not want to change the mounting configuration as I would like to get one that I can just swap out.
Your thoughts?
Rick
Your thoughts?
Rick
Title: Fan motor c-80-c cavilier
Post by: MoonDawg on August 31, 2003, 10:25:18 am
The perfect match is a G.E #5213. Grainger carries it under part # 4M502. Glen