Title: Vendo 63 free vend
Post by: Big W on December 25, 2004, 01:47:48 am
I have a vendo 63, how do you set it to free vend?
Thanks in advance, Wayland
Thanks in advance, Wayland
Title: Vendo 63 free vend
Post by: johnieG on December 25, 2004, 09:04:21 am
1). tie wrap the vending solenoid in the "up postion"
2). use the search feature on this page & type in "free play switch" to find prior postings on wiring up a switch.
2). use the search feature on this page & type in "free play switch" to find prior postings on wiring up a switch.
Title: Vendo 63 free vend
Post by: johnieG on December 25, 2004, 09:10:17 am
here it is...enjoy & happy Holidays!
Title: Vendo 63 free vend
Post by: Big W on December 26, 2004, 01:22:30 pm
Hey Thanks, the button works great. Well almost. I can hear the solenoid engage and it makes a buzzing sound till the button is released. No bottles release. When you pull on a bottle it causes a change in the Humming sound of the solenoid. I can not see anything connected to the solenoid. I think their may be a part missing. I will try to include some pic in a little while.
Thanks for any info, Wayland
Thanks for any info, Wayland
Title: Vendo 63 free vend
Post by: johnieG on December 26, 2004, 08:02:33 pm
perhaps there is too much spring tension on the vending gate, or the rack is set too high for the bottles diameter , also the holes on the side of the vending gate ports (for the vending gates/floor height adjustment ) are set as follows, upper hole, small diameter, middle hole medium, & lower hole is for large diameter bottles.
Title: Vendo 63 free vend
Post by: johnieG on December 26, 2004, 08:05:18 pm
and this
Title: Vendo 63 free vend
Post by: dr galaga on December 26, 2004, 08:10:22 pm
You might also try lubing the vending mechanism. You can see more here: http://soda-machines.com/cgi-loc....;t=1440
Title: Vendo 63 free vend
Post by: johnieG on December 27, 2004, 09:55:16 am
In reguards to your question of what should be attached to the vending soleniod..... 
Title: Vendo 63 free vend
Post by: Big W on December 27, 2004, 02:05:29 pm
I will check out the vend solenoid and see if it has a lever arm attached. This is my very first machine and It cools great. Just trying to get the bugs worked out in the rest of the machine. Coin Part does not work correctly. It says made by Vendo and it is cast metal.
Any thanks for all information, Wayland
Any thanks for all information, Wayland
Title: Vendo 63 free vend
Post by: Big W on December 27, 2004, 02:06:52 pm
Many thanks for all information, Wayland
Title: Vendo 63 free vend
Post by: Big W on December 27, 2004, 04:49:40 pm
Ahhhh, good news. Pulled cover on vend solenoid. All complete. Solenoid would engage but would stick. Put a couple of drops of 3in1 oil on mech. parts. worked it a few times. No more sticking. Still a few problems. After some R&D Lowered shelves to Large Bottle. Actually got a few to vend. Took some working of the free vend switch in unison with working the gate and gate arm. Going to lube all the Mechanical parts and see what happens.
Any advice is greatly appreciated, Wayland
Any advice is greatly appreciated, Wayland
Title: Vendo 63 free vend
Post by: Big W on December 27, 2004, 06:01:15 pm
Dang, the more I touch the more that goes wrong. I noticed that free vend switch would work sometimes and sometimes not. I also notice that when the switch would not work that the fan on the inside of the cooler stopped blowing. So I unplugged the connector on top of the coils that goto the door and checked against the schematic. Nothing. Hummm. So I look at where the power cord comes in from outside the cabnet and it run into a black box about 2"x2" and about an inch thick. Unplugged the compressor and it stoped and the fan on the inside started working. Plugged in the compressor and the fan ran for a while and stopped. Jiggled the wires coming out of the little black box and the fan would come on and go off. What is the black box, is it just a junction box? I think I got some bad connections.
Help, Wayland
Help, Wayland
Title: Vendo 63 free vend
Post by: Big W on December 28, 2004, 10:54:35 am
Yepee, Pulled Black Box behind compressor coils. A little cleaning and wahla. The old cat started working again. Now my machine works great. Two weeks of owning my first machine and I know pretty darn well how the thing is wired and a little about the Mechanical Portion. Thanks to all who helped.
Wayland
Wayland
Title: Vendo 63 free vend
Post by: BryanH on January 19, 2005, 08:25:32 pm
| Quote (johnieG @ Dec. 25 2004,7:04) |
| 1). tie wrap the vending solenoid in the "up postion" 2). use the search feature on this page & type in "free play switch" to find prior postings on wiring up a switch. |
JohnieG - why do you tie the vending solenoid in the up position? I have a VMC56 that appears to have a similar mechanism and I just used the button wiring directions (without tieing the switch) and everything appears to work fine??
Thanks, Bryan
Title: Vendo 63 free vend
Post by: loman4ec on January 19, 2005, 11:12:52 pm
The tie is if you do not want to use a switch. You can just put a tie wrap on the vend mech so that it is always in the vend position.
Title: Vendo 63 free vend
Post by: johnieG on January 20, 2005, 09:19:27 am
| Quote (hartlenb @ Jan. 19 2005,8:25) | ||
JohnieG - why do you tie the vending solenoid in the up position? I have a VMC56 that appears to have a similar mechanism and I just used the button wiring directions (without tieing the switch) and everything appears to work fine?? Thanks, Bryan |
I did not suggest, nor do I ever use the "tiewrapped" or "rubber-band" method of forcing the vend solenoid into the up postion to allow a "free-vend" from all of the bottle gates,
In my personel opinion, these machines were meant to "Vend" so I like using the electrical "free-play " switch wired into the the coinmechs harness, my guests & my kids love to put the coins into the machines & watch them do it's thing, clinks, buzzes & clunks as it vend a soda, I mean come on...if you don't want a Vending Machine , then get a chest cooler, or a refrigerator for cry'n out loud...but hey, I'm jaded on this opinion, gee hope it doesn't show....
Title: Vendo 63 free vend
Post by: BryanH on January 20, 2005, 10:14:48 am
Got it... they were two different options for enabling free vending. In that case, I gotta agree with JohnieG that tie-wrapping takes the fun out of the machine. I plan to build a cable harness that supports both regular coin vending and the free vend button (for when coins just aren't handy).
Bryan
Bryan