|
johnieG
|
 |
« on: July 01, 2007, 12:03:33 am » |
|
I took this in part trade on a machine I sold, & I'm looking for a good home for it, as you can see it's a Vendo 6-case vertical cooler, a model F110, it would be a good project for someone.
It has an had all of it's wood frame replaced (if you aren't aware, all Vendo V83, V110, & 6-case chassis have a wooden (Oak) perimeter frame that supports the maindoor, the inner tank/liner & the maindoor itself. this can lead to the tanic acid in the Oak framing attacking & corroding the metal when it's kept in a wet/damp enviroment. along with wood-rot & drooping door hinges, why did they do this? to conserve metal for war use during WW-II)
the owner was a so-so painter, but a master wood-worker! it has been re-framed in Cedar. & it is possibly one of the best re-framing jobs I've seen.
the chassis is straight, & due to the afore-mentioned rust that is common to these machines, the back & bottom pan have been replaced, and a new door-liner was cut to fit. as I said, it would make a relativly easy project machine.
It also has many new parts installed, new main-door stainless steel hinges, a new maindoor gasket, bottle opener trim bezel. bottle door hinges. as you can see, it does not have compressor, but I do have the evaporator, I could fix you up witha compressor deck & make it functional again, or you could give Global compressors a call too.
The paint job is "OK" but whoever painted it didn't do much in the way of prep work, ( proper sanding, fill-work ) so the paint although shiny, shows the typical sratches & nicks a machine of this age gets in its service life, but surprisingly no dents! the embossing was done with a kids paint brush & well.. you know. looks amateurish.
it needs a lock, two more wire racks, (and a good repaint  :'> ) and of course a compressor, so the hard part has been tackled already, now it needs finishing up to be a really nice looking machine. I'm asking $300 or Best offer, if you are interested, please PM me.
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Pat Pixley
Guest
|
|
« Reply #1 on: July 01, 2007, 09:53:45 pm » |
|
So you guy's know, I saw this yesterday and it is just like John said
it not a bad machine at all , There is some great wood work and metel work done on this.
Get John to do a compressor or get one from Eric over at Global
Compressor and a few small things and you will have a nice machine.
Pat  '>
|
|
|
|
|
Logged
|
|
|
|
|
sodaworks
|
|
« Reply #2 on: July 01, 2007, 10:33:24 pm » |
|
If you were located closer to me I would buy it. That's a nice 110
|
|
|
|
|
Logged
|
TERRY@SODAWORKS RESTORATIONS
Lots of Round Top machines
Buy-Sell-Trade-Restorations
|
|
|
|
Kevin C
|
|
« Reply #3 on: July 07, 2007, 08:36:53 pm » |
|
Hey JG
I might be interested in having that thing down here at the beach in SC. I have the V110 Pepsi-Coke machine right now.
Send me an email with what you want fr it.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
audiobeer
|
|
« Reply #4 on: July 07, 2007, 09:30:26 pm » |
|
That's a very nice canidate. Wish I lived close to you. I'd buy it in a heartbeat!
|
|
|
|
|
Logged
|
Missouri
|
|
|
|
johnieG
|
|
« Reply #5 on: July 07, 2007, 10:42:43 pm » |
|
(Kevin C @ Jul. 07 2007,9:36)
QUOTE Hey JG
I might be interested in having that thing down here at the beach in SC. I have the V110 Pepsi-Coke machine right now.
Send me an email with what you want fr it.
Kevin heya Kevin, Hi, I'm asking $300 OBO, Eric from global compressors has first dibs on the machine at this point. & you have second dibs. ( if he decides he doesn't want it.) thanks...John |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Kevin C
|
|
« Reply #6 on: July 13, 2007, 07:21:11 pm » |
|
J G
Let me know. I will take it.
Kevin
|
|
|
|
|
Logged
|
Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job
|
|
|
|
johnieG
|
|
« Reply #7 on: July 13, 2007, 09:12:56 pm » |
|
(Kevin C @ Jul. 13 2007,8:21)
QUOTE J G
Let me know. I will take it.
Kevin Keven, I've sent you a PM |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
