SMC Discussion Areas
May 23, 2024, 06:02:13 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Cav. USS-64 main door removal.  (Read 2413 times)
0 Members and 1 Guest are viewing this topic.
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938


« on: February 18, 2008, 08:32:42 pm »

Any been there done that tips?
Thanks!
Creighton
Logged
rogerz
Guest
« Reply #1 on: February 18, 2008, 09:37:09 pm »

Creighton,
It's a piece of cake. I just finished putting one back together.
You have to take the inner panel off to disconnect the light up sign wires.
Undo the coin mech harness. I used 3 different colors of tape on the wires that I had to cut. (blue, pink and black wire)
Then I cut the wire in the middle of the tape so when I went to splice them back I
could easily tell which ones went where. I also took some pics of the wires and made a schematic of which posts of the jones plug they came off. After I had it apart for a year
(not all my fault) those pics came in handy.
Then the nuts on the upper hinge and lift the door out.

Hope this helps
rz
Logged
rogerz
Guest
« Reply #2 on: February 18, 2008, 09:51:20 pm »

hey look laugh that post made me a 25 cent member finally!
 happydrinkers

Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!