Cavalier 8-64 Wiring Diagram?

[Rob_Feature]

      On your picture of the junction box, the word 'Line' indicates where you will connect your black compressor wires, to the same terminals as the blue and purple wires.

First, thanks for the reply...I was about to 'guess' and plug it in but caught this first...an omen for me to hold off, maybe.

I see what you mean, MoonDawg, but compare my pic (with the word on it) to the pic tkaz posted...I can't figure out any relation to the order of the words on the box to the order of the wires (or their colors) when everything is plugged in.

Basically all the wire colors are wrong (on both my and tkaz's machine), plus the ordering on the box doesn't make alot of sense.

So I'm still stumped here.

[Rob_Feature]

OK, for the record, I'm really impatient which is why I also break things often   Luckily I figured it out by using my best guess based on the diagram.  In tkaz's pic, the hot line goes into the top left port (next to the blue) and the return line goes into the bottom left port (next to the black). 

I think these machines must have a different schematic than what's posted here because it doesn't resemble the layout shown in the diagram at all.

Thanks for everyones help...now I just gotta get the vend switches figured out

[tkaz]

Guess I was a little late, but you're right on the ports for line wires.  I finally dug up the photo I took from the machine itself.

What's going on with the vend switches?  There is only one microswitch at the bottom of the stack along with the vend solenoid.  Pretty easy to figure out.

[Rob_Feature]

YES!  That's apparently what I needed tkaz...mine was totally worn off the door and this explains things perfectly.  Thanks for posting...I'm sure this will help someone in the future.

PS:  I posted my vend issue over here in the vend section, thanks for asking!