SMC Discussion Areas
May 13, 2024, 11:11:52 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Vendo e110c  (Read 4627 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: April 20, 2004, 08:23:11 pm »

just purcased a Vendo coke machine. Just starting to collect.
Serial is E207 . Can anyone tell me if this is a self serve or coin Mec. no coin mec. on front door but has 3 bolts on front door and  has a bottle top opener on front door that looks like someone adapted on front door. has no selfs inside refrig. What does E stand for? Shouldnt it have a V?
i would appreciate any info on this machine and where i can buy shelves and parts to restore.
                                  Thank you in advance for your time. '<img'>
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: April 20, 2004, 09:14:32 pm »

Hi & welcome , a picture(s) might help out in this case,
if it has a bottle gate with holes, ( in the bottle door )then it's probably a V110,if it has just shelves going right up into the vending door area, were you can grab a bottle off of the shelf then it's probably a 6-case V110

please post a picture!   '<img'>
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
vendobaldtops
Guest
« Reply #2 on: April 21, 2004, 09:48:11 pm »

I agree, it sounds like you have a six-case vertical self-serve.  I have one myself and it really is a great machine..even though it does not have a bottle rack or a coin door, it's still heavy as heck.  It sounds like you have a later model with an external cap catcher off to the side.  Check the machine section on thios website under "Vendo" then "6-Case"  They show both models.  Check the parts dealers on this site as well...as I recall, shelves cost around 25 bucks each
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!