SMC Discussion Areas
May 03, 2024, 07:31:08 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Coin mechanisim need help  (Read 4543 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: June 15, 2002, 08:12:28 pm »

I have a Canada dry dr pepper machine with the bottles on the side The coins drops in but go right thru and I cant get the soda Out I took the mechanisim apart and there are 3 wire levers if you press the middle one twice it works Can any one Help The model is 8-50-007 type B UMC Industries . front label says National Rejectors Hot springs arkansas

Thanks Bob
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: June 30, 2002, 08:44:49 pm »

Sounds like the slug-rejecter (top portion that gauges if the coins are the right size,etc & aren't slugs) is probably dirty, see if it detatches from the lower half & give a good cleaning in hot soapy water & scrub with an old tooth brush along the coin path, also make sure the bent coin release isn't stuck part way down. hope it helps.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!