SMC Discussion Areas
May 15, 2024, 02:21:29 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: Faygo 56 Transitional $225  (Read 9313 times)
0 Members and 1 Guest are viewing this topic.
bmw90w
10 Cent Member
***
Offline Offline

Posts: 190


« on: March 27, 2010, 05:31:23 pm »

Hey guys I am finishing up my 81 and am done with projects for a while. I am hoping someone on here would get this before I put it on craigslist. This machine has bad beltline rust, but the otherwise the body is nice and straight. The cooling sytem cools, but it could use some paint and a rewire. I removed the tub and put rubberized undercoat on it. Other than that, everything is in pieces. The insulation is out, and I can put the pieces back together if needed. Includes working coin mech as well. Once the beltline rust is dealt with, it is useable as is or a good candidate for restoration. I had a fabricator cut me a new pan to replace the rusted out area with, I just haven't welded it in yet. Let me know if you have any questions. I want to sell whole and not piece out.
Logged

Cavalier CS-96
Vendo 81-A
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« Reply #1 on: March 27, 2010, 07:15:43 pm »

Thats a nice machine. The cabinet is the same as any V56 so you could find a cheap V56 and swap cabinets. It would be easier than fixing if you were going to repaint. Nice machine. Where are you located? What do you want for it?
Logged
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« Reply #2 on: March 27, 2010, 07:20:33 pm »

Sorry I see what you want for it. Where are you located?
Logged
bmw90w
10 Cent Member
***
Offline Offline

Posts: 190


« Reply #3 on: March 27, 2010, 08:06:39 pm »

Hey thanks for the comment. I know it would be easier to get a new cabinet, but I like to keep everything the way it is. The paint is a little faded, but I bet it would buff out just fine. If I was to keep it, I would just buff it and weld in the new pan. Ofcourse I always wanted a vernors machine, but I didn't want to invest in the paint job. I honestly just want the floor space back, an am done with working on machines for a while! My 81 took me a lot longer than I thought! The machine is in Atlanta.
Logged

Cavalier CS-96
Vendo 81-A
zadd
Soda Jerks
*****
Offline Offline

Posts: 933



« Reply #4 on: March 27, 2010, 08:30:54 pm »

If I could get it to Kansas I would be all over it   down
Logged

Zadd
Dr Pepper Queen Anne Bottle Machine
Dr Pepper Queen Anne Can Machine
7up Ideal 55 slider
Vendo 81D
VMC 33D
Nehi Pelco Koolie
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« Reply #5 on: March 27, 2010, 09:25:59 pm »

If it were in Ohio it would be in my house.
Logged
jedarke
Newbie
*
Offline Offline

Posts: 23


« Reply #6 on: March 28, 2010, 07:53:01 am »

Hey, I'll take it and am in Atlanta.  Been looking fro a Faygo Machine.  Let me know how to get in touch with you and I can come get it.

 Thanks!
Logged

V-63
V-39
C-55
VMC 56 Faygo Transitional
V-81B
V-44
mznb1u
Soda Jerks
*****
Offline Offline

Posts: 3348


Those Who Stay Will be Champions!


« Reply #7 on: March 28, 2010, 10:43:32 am »

Nice to see a Detroit branded machine getting that far South and staying original!  You can still get Red Pop, Root Beer, Cream Soda, Orange, Grape and Rock & Rye in 12 oz. long neck bottles.  These are original formula with real cane sugar and not HFCS!  They would look great in that machine!

 drinking Tim drinking
Logged
jedarke
Newbie
*
Offline Offline

Posts: 23


« Reply #8 on: March 28, 2010, 11:40:48 am »

I'm from Detroit originally and drank Faygo as a young boy, so can't pass this up.  I was at a Quick Trip down here the other day to get some gas and went in to get a Coke....to my surprise they were carrying some Faygo products.  Bought some Red Pop for me and my boys.  No Rock & Rye but will see next time.  Will have to get some for the machine!
Logged

V-63
V-39
C-55
VMC 56 Faygo Transitional
V-81B
V-44
Pat Pixley
Guest
« Reply #9 on: March 28, 2010, 02:57:29 pm »

Well Cool glad it is going to a member here and that it is not going to be parted out. smile.
Logged
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!