SMC Discussion Areas

The Coin Return => Estimated Values => Topic started by: 66GTO on January 20, 2013, 01:34:00 pm



Title: Value on this Generic VMC 81
Post by: 66GTO on January 20, 2013, 01:34:00 pm
Hi All - Looking to see what the value is on this generic VMC, and any other comments you guys might have on the machine. 

It appears complete, refrigeration unit works, was originally white and somebody rattle can painted over it in green.  Body is very straight and I see little visible rust.



Title: Re: Value on this Generic VMC 81
Post by: MaineT on January 20, 2013, 01:57:06 pm
In my opinion, $2500-3000 if I were selling it..... but I'm too cheap to pay that much.

It would make a great OC machine!!


Title: Re: Value on this Generic VMC 81
Post by: mygoose101 on January 20, 2013, 03:45:22 pm
Very collectible machine. One of the few machines that has actually gone up in value over the past few years. $2,500 - $3,000 as said before is right on.


Title: Re: Value on this Generic VMC 81
Post by: TheGarbageHunter on January 20, 2013, 04:07:56 pm
My only concern is that I did not find that machine.

BUY IT!


Title: Re: Value on this Generic VMC 81
Post by: Blind1968 on January 20, 2013, 04:45:39 pm
Neat machine with allot of possibility's...


Title: Re: Value on this Generic VMC 81
Post by: TomFromJersey on January 20, 2013, 06:42:54 pm
I think $2500 would be a very fair.......go buy it!
   TFJ


Title: Re: Value on this Generic VMC 81
Post by: SIGNGUY on January 21, 2013, 09:36:26 am
Yeah I think I paid 2200-2500 for the last Generic I bought .. and was in worse condition...
if you can get it for that or under buy it,  even if you don't need it , buy it and you'll find someone one here who will want it.


Title: Re: Value on this Generic VMC 81
Post by: 66GTO on January 21, 2013, 11:47:23 am
Well I ended up getting the machine.  I wasn't looking for this model, but couldn't pass up on the deal.  My plan is to either:

A. Keep it for parts (I have a lead with a guy who may sell me a Pepsi 81 that's missing coin door, bezels, and mech - should know by this spring if that will work out), then sell what's left.
B. Offer it in trade for a Pepsi 81 of similar condition.
C. Sell it to raise funds to purchase a Pepsi 81, assuming I can find one.  

Questions that I have:

1. With the coin entry bezel, what's the window on the right?  I'm guessing it's for displaying "use correct change" if it was a change giver mech.  Since it's not, is the bezel correct?  If it is, what usually went in the window?  This one has a white stripe with no writing in it.

2. Anybody know anything about Duffy's?


Title: Re: Value on this Generic VMC 81
Post by: Marvin on January 21, 2013, 11:57:23 am
That machine is to nice / rare to use as a parts donor. 

The parts you need for the possible restore on the Pepsi machine will show up.  Just be on the lookout for a VMC 110 large door for the needed pieces.


Title: Re: Value on this Generic VMC 81
Post by: Blind1968 on January 21, 2013, 02:24:53 pm
 I agree with Marvin I would keep it together as a whole unit.


Title: Re: Value on this Generic VMC 81
Post by: bcharlton on January 21, 2013, 02:35:20 pm
Than you can have one of these.
I think this may be one of coolest machines ever.  I don't care if it is a fantasy piece.  I would do one up just like it.

BC


Title: Re: Value on this Generic VMC 81
Post by: TheGarbageHunter on January 21, 2013, 03:10:28 pm
Do not part out such a nice machine!!!


Title: Re: Value on this Generic VMC 81
Post by: coke_and_stuff on January 21, 2013, 04:27:07 pm
How much for the front main door bare? I may be a buyer then you can get your pepsi door and swap over all the parts onto the pepsi. Let me know

Thanks

Joey


Title: Re: Value on this Generic VMC 81
Post by: scalebowler on January 21, 2013, 04:40:15 pm
I found this website for Duffy's root beer. http://duffysrootbeer.com/Home_Page.php Not sure if it's the same company but I might have to see about finding a bottle of that stuff since I have a coworker who's last name is Duffy.


Title: Re: Value on this Generic VMC 81
Post by: 66GTO on January 21, 2013, 06:37:49 pm
How much for the front main door bare? I may be a buyer then you can get your pepsi door and swap over all the parts onto the pepsi. Let me know

Thanks

Joey

Sounds like it would be best if I didn't part it out, but I will get in touch with you if I do.  I have no idea. 


Title: Re: Value on this Generic VMC 81
Post by: coke_and_stuff on January 21, 2013, 06:42:02 pm
Sounds great let me know if you decide to.

Joey