SMC Discussion Areas
May 17, 2024, 05:54:35 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: compressor question  (Read 4062 times)
0 Members and 1 Guest are viewing this topic.
briandr1
25 Cent Member
****
Offline Offline

Posts: 459



« on: January 01, 2011, 01:31:47 pm »

I got the evap fan running on my cavalier 96d the compressor doesnt come on i dont even hear the starter clicking to start the compressor. I should install a 3 in 1 hot start and go from there right? The refridgerant lines are clean no oil anywhere I dont think its lost its charge its a sealed system never been recharged.I think my problem lies in the starter for the compressor any suggestions?Huh?? hopefull
Logged

selectivend 64 sa
2 cavalier 96
1975 bally hi deal em pinball machine
1920 wate and fate penny  scale
Yarochrehc
Soda Jerks
*****
Offline Offline

Posts: 787



« Reply #1 on: January 01, 2011, 01:35:06 pm »

Have you tried to bypass the temp. control, does the condensor fan run at all?
Logged

Bob

Restored
Vendo H63B  Coke in use in basement
Original
Vendo V/VF63/7  Pepsi in use

Restoring: Glascock Standard
(2) Vendo 63
(2)Vendo 90
Vendo 126  waiting for paint
VMC 56
Westinghouse WE-6
briandr1
25 Cent Member
****
Offline Offline

Posts: 459



« Reply #2 on: January 01, 2011, 01:50:49 pm »

No I havent could the thermostat could cause the comp not to start I didnt think of that. This machine has been sitting about 15 yrs without running Ive read sometimes old compressors need extra help starting if they have set a while.
Logged

selectivend 64 sa
2 cavalier 96
1975 bally hi deal em pinball machine
1920 wate and fate penny  scale
briandr1
25 Cent Member
****
Offline Offline

Posts: 459



« Reply #3 on: January 01, 2011, 02:24:55 pm »

I bypassed the switch no fan but i need to pull the fan out and check it it may not work my dad had the machine he said it quit cooling but the comp did run so the fan may have been the problem in the first place.
Logged

selectivend 64 sa
2 cavalier 96
1975 bally hi deal em pinball machine
1920 wate and fate penny  scale
Yarochrehc
Soda Jerks
*****
Offline Offline

Posts: 787



« Reply #4 on: January 03, 2011, 05:19:38 pm »

Usually the compressor & the condenser fan run at the same time unless the compressor is kicked off on the over load or bad wiring. They are both controlled by the thermostat.
Logged

Bob

Restored
Vendo H63B  Coke in use in basement
Original
Vendo V/VF63/7  Pepsi in use

Restoring: Glascock Standard
(2) Vendo 63
(2)Vendo 90
Vendo 126  waiting for paint
VMC 56
Westinghouse WE-6
briandr1
25 Cent Member
****
Offline Offline

Posts: 459



« Reply #5 on: January 03, 2011, 07:43:34 pm »

yea your right I think Im just going to pull the whole unit out it will make it much easier to work on and just replace both fans thanks for your help


Brian
Logged

selectivend 64 sa
2 cavalier 96
1975 bally hi deal em pinball machine
1920 wate and fate penny  scale
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6224



« Reply #6 on: January 03, 2011, 08:41:47 pm »

      Before you replace the condenser fan, try hooking it up direct to 120 volt power. 
The big question is why does the compressor not start? Do the same thing and send voltage straight to the 2 terminals. If that doesn't start it, then try the 3 in 1 relay.
Logged

Glen
briandr1
25 Cent Member
****
Offline Offline

Posts: 459



« Reply #7 on: January 03, 2011, 09:36:43 pm »

Will do that spunds like a plan thanks alot Glen

Brian
Logged

selectivend 64 sa
2 cavalier 96
1975 bally hi deal em pinball machine
1920 wate and fate penny  scale
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!